You copied the Doc URL to your clipboard.

CCSIDR2_EL1, Current Cache Size ID Register 2

The CCSIDR2_EL1 characteristics are:

Purpose

When ARMv8.3-CCIDX is implemented, provides the information about the architecture of the currently selected cache from bits[63:32] of CCSIDR_EL1.

When ARMv8.3-CCIDX is not implemented, this register is not implemented.

Configuration

AArch64 System register CCSIDR2_EL1 bits [31:0] are architecturally mapped to AArch32 System register CCSIDR2[31:0] .

This register is present only when ARMv8.3-CCIDX is implemented. Otherwise, direct accesses to CCSIDR2_EL1 are UNDEFINED.

If AArch32 is not implemented, it is IMPLEMENTATION DEFINED whether reading this register gives an UNKNOWN value or is UNDEFINED.

The implementation includes one CCSIDR2_EL1 for each cache that it can access. CSSELR_EL1 selects which Cache Size ID Register is accessible.

Attributes

CCSIDR2_EL1 is a 64-bit register.

Field descriptions

The CCSIDR2_EL1 bit assignments are:

6362616059585756555453525150494847464544434241403938373635343332
00000000000000000000000000000000
00000000NumSets
313029282726252423222120191817161514131211109876543210

Bits [63:24]

Reserved, RES0.

NumSets, bits [23:0]

(Number of sets in cache) - 1, therefore a value of 0 indicates 1 set in the cache. The number of sets does not have to be a power of 2.

Accessing the CCSIDR2_EL1

If CSSELR_EL1.Level is programmed to a cache level that is not implemented, then on a read of the CCSIDR2_EL1 the behavior is CONSTRAINED UNPREDICTABLE, and can be one of the following:

  • The CCSIDR2_EL1 read is treated as NOP.
  • The CCSIDR2_EL1 read is UNDEFINED.
  • The CCSIDR2_EL1 read returns an UNKNOWN value.

Accesses to this register use the following encodings:

MRS <Xt>, CCSIDR2_EL1

CRnop0op1op2CRm
0b00000b110b0010b0100b0000
if PSTATE.EL == EL0 then
    UNDEFINED;
elsif PSTATE.EL == EL1 then
    if EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TID2 == '1' then
        AArch64.SystemAccessTrap(EL2, 0x18);
    elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TID4 == '1' then
        AArch64.SystemAccessTrap(EL2, 0x18);
    else
        return CCSIDR2_EL1;
elsif PSTATE.EL == EL2 then
    return CCSIDR2_EL1;
elsif PSTATE.EL == EL3 then
    return CCSIDR2_EL1;
              


Was this page helpful? Yes No