You copied the Doc URL to your clipboard.

MPAMCFG_PRI, MPAM Priority Partition Configuration Register

The MPAMCFG_PRI characteristics are:

Purpose

MPAMCFG_PRI is a 32-bit read-write register that controls the internal and downstream priority of requests attributed to the PARTID selected by MPAMCFG_PART_SEL.

Configuration

The power domain of MPAMCFG_PRI is IMPLEMENTATION DEFINED.

This register is present only when MPAMF_IDR.HAS_PRI_PART == 1. Otherwise, direct accesses to MPAMCFG_PRI are IMPLEMENTATION DEFINED.

Attributes

MPAMCFG_PRI is a 32-bit register.

Field descriptions

The MPAMCFG_PRI bit assignments are:

313029282726252423222120191817161514131211109876543210
DSPRIINTPRI

DSPRI, bits [31:16]

Downstream priority.

If MPAMF_PRI_IDR.HAS_DSPRI == 0, bits of this field are RES0, as this field is not used.

If MPAMF_PRI_IDR.HAS_DSPRI == 1, this field is a priority value applied to downstream communications from this MSC for transactions of the partition selected by MPAMCFG_PART_SEL.

The implemented width of this field is MPAMF_PRI_IDR.DSPRI_WD bits.

The encoding of priority is 0-as-lowest or 0-as-highest priority according to the value of MPAMF_PRI_IDR.DSPRI_0_IS_LOW.

INTPRI, bits [15:0]

Internal priority.

If MPAMF_PRI_IDR.HAS_INTPRI == 0, bits of this field are RES0 as this field is not used.

If MPAMF_PRI_IDR.HAS_INTPRI == 1, this field is a priority value applied internally inside this MSC for transactions of the partition selected by Mext-PAMCFG_PART_SEL.

The implemented width of this field is MPAMF_PRI_IDR.INTPRI_WD bits.

The encoding of priority is 0-as-lowest or 0-as-highest priority according to the value of MPAMF_PRI_IDR.INTPRI_0_IS_LOW.

Accessing the MPAMCFG_PRI

This register is part of the MPAMF_BASE memory frame. In a system that supports Secure and Non-secure memory maps, the MPAMF_BASE frame must be accessible in both Secure and Non-secure memory address maps.

MPAMCFG_PRI must be accessible from the Non-secure and Secure address maps.

MPAMCFG_PRI must be banked for the Secure and Non-secure address maps. The Secure instance accesses the priority partitioning used for Secure PARTIDs, and the Non-secure instance accesses the priority partitioning used for Non-secure PARTIDs.

MPAMCFG_PRI can be accessed through the memory-mapped interfaces:

ComponentFrameOffsetInstance
MPAM.anyMPAMF_BASE_s0x0400MPAMCFG_PRI_s

Access on this interface is RW.

ComponentFrameOffsetInstance
MPAM.anyMPAMF_BASE_ns0x0400MPAMCFG_PRI_ns

Access on this interface is RW.



Was this page helpful? Yes No