PMCEID1_EL0, Performance Monitors Common Event Identification register 1
The PMCEID1_EL0 characteristics are:
Purpose
Defines which common architectural events and common microarchitectural events are implemented, or counted, using PMU events in the ranges 0x0020 to 0x003F and 0x4020 to 0x403F.
When the value of a bit in the register is 1 the corresponding common event is implemented and counted.
Arm recommends that, if a common event is never counted, the value of the corresponding register bit is 0.
For more information about the common events and the use of the PMCEID<n>_EL0 registers see The section describing 'Event numbers and common events' in chapter D5 'The Performance Monitors Extension' of the Arm Architecture Reference Manual, for Armv8-A architecture profile.
Configuration
AArch64 System register PMCEID1_EL0 bits [31:0] are architecturally mapped to AArch32 System register PMCEID1[31:0] .
AArch64 System register PMCEID1_EL0 bits [63:32] are architecturally mapped to AArch32 System register PMCEID3[31:0] .
AArch64 System register PMCEID1_EL0 bits [31:0] are architecturally mapped to External register PMCEID1[31:0] .
AArch64 System register PMCEID1_EL0 bits [63:32] are architecturally mapped to External register PMCEID3[31:0] .
Attributes
PMCEID1_EL0 is a 64-bit register.
Field descriptions
The PMCEID1_EL0 bit assignments are:
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| IDhi<n>, bit [n+32] | |||||||||||||||||||||||||||||||
| ID<n>, bit [n] | |||||||||||||||||||||||||||||||
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
IDhi<n>, bit [n+32], for n = 0 to 31
From Armv8.1:
From Armv8.1:
IDhi[n] corresponds to common event (0x4020 + n).
For each bit:
| IDhi<n> | Meaning |
|---|---|
| 0b0 |
The common event is not implemented, or not counted. |
| 0b1 |
The common event is implemented. |
A bit that corresponds to a reserved event number is reserved. The value might be used in a future revision of the architecture to identify an additional common event.
Such an event might be added retrospectively to an earlier version of the PMU architecture, provided the event does not require any additional PMU features and has an event number that can be represented in the PMCEID<n>_EL0 registers of that earlier version of the PMU architecture.
Otherwise:
Otherwise:
Reserved, RES0.
ID<n>, bit [n], for n = 0 to 31
ID[n] corresponds to common event (0x0020 + n).
For each bit:
| ID<n> | Meaning |
|---|---|
| 0b0 |
The common event is not implemented, or not counted. |
| 0b1 |
The common event is implemented. |
A bit that corresponds to a reserved event number is reserved. The value might be used in a future revision of the architecture to identify an additional common event.
Such an event might be added retrospectively to an earlier version of the PMU architecture, provided the event does not require any additional PMU features and has an event number that can be represented in the PMCEID<n>_EL0 registers of that earlier version of the PMU architecture.
Accessing the PMCEID1_EL0
Accesses to this register use the following encodings:
MRS <Xt>, PMCEID1_EL0
| op0 | op1 | CRn | CRm | op2 |
|---|---|---|---|---|
| 0b11 | 0b011 | 0b1001 | 0b1100 | 0b111 |
if PSTATE.EL == EL0 then
if !ELUsingAArch32(EL1) && PMUSERENR_EL0.EN == '0' then
if EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TGE == '1' then
AArch64.SystemAccessTrap(EL2, 0x18);
else
AArch64.SystemAccessTrap(EL1, 0x18);
elsif EL2Enabled() && !ELUsingAArch32(EL2) && MDCR_EL2.TPM == '1' then
AArch64.SystemAccessTrap(EL2, 0x18);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then
AArch64.SystemAccessTrap(EL3, 0x18);
else
return PMCEID1_EL0;
elsif PSTATE.EL == EL1 then
if EL2Enabled() && !ELUsingAArch32(EL2) && MDCR_EL2.TPM == '1' then
AArch64.SystemAccessTrap(EL2, 0x18);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then
AArch64.SystemAccessTrap(EL3, 0x18);
else
return PMCEID1_EL0;
elsif PSTATE.EL == EL2 then
if HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TPM == '1' then
AArch64.SystemAccessTrap(EL3, 0x18);
else
return PMCEID1_EL0;
elsif PSTATE.EL == EL3 then
return PMCEID1_EL0;