ERRPIDR0, Peripheral Identification Register 0
The ERRPIDR0 characteristics are:
Provides discovery information about the component.
For more information, see About the Peripheral identification scheme in the Arm® Architecture Reference Manual, Armv8, for Armv8-A architecture profile.
Implementation of this register is OPTIONAL.
This register is present only when RAS is implemented. Otherwise, direct accesses to ERRPIDR0 are RES0.
ERRPIDR0 is a 32-bit register.
The ERRPIDR0 bit assignments are:
PART_0, bits [7:0]
Part number, bits [7:0].
The part number is selected by the designer of the component. The designer chooses whether to use a 12-bit or a 16-bit part number, and:
If a 12-bit part number is used, it is stored in ERRPIDR1.PART_1 and this field.
This field reads as an IMPLEMENTATION DEFINED value.
Accessing the ERRPIDR0
ERRPIDR0 can be accessed through the memory-mapped interfaces:
Access on this interface is RO.