You copied the Doc URL to your clipboard.

MPAMCFG_MBW_MIN, MPAM Cache Maximum Capacity Partition Configuration Register

The MPAMCFG_MBW_MIN characteristics are:

Purpose

MPAMCFG_MBW_MIN is a 32-bit read-write register that controls the minimum fraction of memory bandwidth that the PARTID selected by MPAMCFG_PART_SEL is permitted to use. A PARTID that has used less than MIN is given preferential access to bandwidth.

Configuration

The power domain of MPAMCFG_MBW_MIN is IMPLEMENTATION DEFINED.

This register is present only when MPAMF_IDR.HAS_MBW_PART == 1 and MPAMF_MBW_IDR.HAS_MIN == 1. Otherwise, direct accesses to MPAMCFG_MBW_MIN are IMPLEMENTATION DEFINED.

Attributes

MPAMCFG_MBW_MIN is a 32-bit register.

Field descriptions

The MPAMCFG_MBW_MIN bit assignments are:

313029282726252423222120191817161514131211109876543210
RES0MIN

Bits [31:16]

Reserved, RES0.

MIN, bits [15:0]

Memory minimum bandwidth allocated to the partition selected by MPAMCFG_PART_SEL. MIN is in fixed-point fraction format. The fraction represents the portion of the total memory bandwidth capacity through the controlled component that the PARTID is permitted to allocate.

The implemented width of the fixed-point fraction is given in MPAMF_MBW_IDR.BWA_WD.

The fixed-point fraction MIN is less than 1. The implied binary point is between bits 15 and 16. This representation has as the largest fraction of the cache that can be represented in an implementation with w implemented bits is 1 - 1/w.

Accessing the MPAMCFG_MBW_MIN

This register is part of the MPAMF_BASE memory frame. In a system that supports Secure and Non-secure memory maps, the MPAMF_BASE frame must be accessible in both Secure and Non-secure memory address maps.

MPAMCFG_MBW_MIN must be accessible from the Non-secure and Secure address maps.

MPAMCFG_MBW_MIN must be banked for the Secure and Non-secure address maps. The Secure instance accesses the memory minimum bandwidth partitioning used for Secure PARTIDs, and the Non-secure instance accesses the memory minimum bandwidth partitioning used for Non-secure PARTIDs.

MPAMCFG_MBW_MIN can be accessed through the memory-mapped interfaces:

ComponentFrameOffsetInstance
MPAM.anyMPAMF_BASE_s0x0200MPAMCFG_MBW_MIN_s

Access on this interface is RW.

ComponentFrameOffsetInstance
MPAM.anyMPAMF_BASE_ns0x0200MPAMCFG_MBW_MIN_ns

Access on this interface is RW.



Was this page helpful? Yes No