CTIAPPSET, CTI Application Trigger Set register
The CTIAPPSET characteristics are:
Sets bits of the Application Trigger register.
CTIAPPSET is in the Debug power domain.
CTIAPPSET is a 32-bit register.
The CTIAPPSET bit assignments are:
|APPSET<x>, bit [x]|
APPSET<x>, bit [x], for x = 0 to 31
Application trigger <x> enable.
Bits [31:N] are RAZ/WI. N is the number of ECT channels implemented as defined by the CTIDEVID.NUMCHAN field.
Possible values of this bit are:
Reading this means the application trigger is inactive. Writing this has no effect.
Reading this means the application trigger is active. Writing this sets the corresponding bit in CTIAPPTRIG to 1 and generates a channel event.
If the ECT does not support multicycle channel events, use of CTIAPPSET is deprecated and the debugger must only use CTIAPPPULSE.
On a External debug reset, this field resets to an architecturally UNKNOWN value.
Accessing the CTIAPPSET
CTIAPPSET can be accessed through the external debug interface:
This interface is accessible as follows:
- When SoftwareLockStatus() accesses to this register are RO.
- When !SoftwareLockStatus() accesses to this register are RW.