You copied the Doc URL to your clipboard.

EDPIDR3, External Debug Peripheral Identification Register 3

The EDPIDR3 characteristics are:

Purpose

Provides information to identify an external debug component.

For more information see 'About the Peripheral identification scheme' in the Arm® Architecture Reference Manual, Armv8, for Armv8-A architecture profile, section H8 (About the External Debug Registers).

Configuration

Implementation of this register is OPTIONAL.

If ARMv8.3-DoPD is implemented, this register is in the Core power domain. If ARMv8.3-DoPD is not implemented, this register is in the Debug power domain.

This register is required for CoreSight compliance.

Attributes

EDPIDR3 is a 32-bit register.

Field descriptions

The EDPIDR3 bit assignments are:

313029282726252423222120191817161514131211109876543210
RES0REVANDCMOD

Bits [31:8]

Reserved, RES0.

REVAND, bits [7:4]

Part minor revision. Parts using EDPIDR2.REVISION as an extension to the Part number must use this field as a major revision number.

CMOD, bits [3:0]

Customer modified. Indicates someone other than the Designer has modified the component.

Accessing the EDPIDR3

EDPIDR3 can be accessed through the external debug interface:

ComponentOffsetInstance
Debug0xFECEDPIDR3

This interface is accessible as follows:

  • When ARMv8.3-DoPD is not implemented or IsCorePowered() accesses to this register are RO.
  • Otherwise accesses to this register generate an error response.