AMCNTENCLR1, Activity Monitors Count Enable Clear Register 1
The AMCNTENCLR1 characteristics are:
Purpose
Disable control bits for the auxiliary activity monitors event counters, AMEVCNTR1<n>.
Configuration
AArch32 System register AMCNTENCLR1 bits [31:0] are architecturally mapped to AArch64 System register AMCNTENCLR1_EL0[31:0] .
AArch32 System register AMCNTENCLR1 bits [31:0] are architecturally mapped to External register AMCNTENCLR1[31:0] .
This register is present only when AMUv1 is implemented. Otherwise, direct accesses to AMCNTENCLR1 are UNDEFINED.
Attributes
AMCNTENCLR1 is a 32-bit register.
Field descriptions
The AMCNTENCLR1 bit assignments are:
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| RES0 | P<n>, bit [n] | ||||||||||||||||||||||||||||||
Bits [31:16]
Reserved, RES0.
P<n>, bit [n], for n = 0 to 15
Activity monitor event counter disable bit for AMEVCNTR1<n>.
Bits [31:16] are RES0. Bits [15:N] are RAZ/WI. N is the value in AMCGCR_EL0.CG1NC.
Possible values of each bit are:
| P<n> | Meaning |
|---|---|
| 0b0 |
When read, means that AMEVCNTR1<n> is disabled. When written, has no effect. |
| 0b1 |
When read, means that AMEVCNTR1<n> is enabled. When written, disables AMEVCNTR1<n>. |
On a Cold reset, this field resets to 0.
Accessing the AMCNTENCLR1
If the number of auxiliary activity monitor event counters implemented is zero, reads and writes of AMCNTENCLR1 are UNDEFINED.
The number of auxiliary activity monitor event counters implemented is zero exactly when AMCFGR.NCG == 0b0000.
Accesses to this register use the following encodings:
MRC{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b000 | 0b1101 | 0b0011 | 0b000 |
if PSTATE.EL == EL0 then
if Halted() && HaveEL(EL3) && EDSCR.SDD == '1' && boolean IMPLEMENTATION_DEFINED "EL3 trap priority when SDD == '1'" && !ELUsingAArch32(EL3) && CPTR_EL3.TAM == '1' then
UNDEFINED;
elsif !ELUsingAArch32(EL1) && AMUSERENR_EL0.EN == '0' then
if EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TGE == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
else
AArch64.AArch32SystemAccessTrap(EL1, 0x03);
elsif ELUsingAArch32(EL1) && AMUSERENR.EN == '0' then
if EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TGE == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif EL2Enabled() && ELUsingAArch32(EL2) && HCR.TGE == '1' then
AArch32.TakeHypTrapException(0x00);
else
UNDEFINED;
elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.<E2H,TGE> != '11' && HSTR_EL2.T13 == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T13 == '1' then
AArch32.TakeHypTrapException(0x03);
elsif EL2Enabled() && !ELUsingAArch32(EL2) && CPTR_EL2.TAM == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif EL2Enabled() && ELUsingAArch32(EL2) && HCPTR.TAM == '1' then
AArch32.TakeHypTrapException(0x03);
elsif EL2Enabled() && !ELUsingAArch32(EL1) && HCR_EL2.<E2H,TGE> != '11' && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HAFGRTR_EL2.AMCNTEN1 == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && CPTR_EL3.TAM == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.AArch32SystemAccessTrap(EL3, 0x03);
else
return AMCNTENCLR1;
elsif PSTATE.EL == EL1 then
if Halted() && HaveEL(EL3) && EDSCR.SDD == '1' && boolean IMPLEMENTATION_DEFINED "EL3 trap priority when SDD == '1'" && !ELUsingAArch32(EL3) && CPTR_EL3.TAM == '1' then
UNDEFINED;
elsif EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T13 == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T13 == '1' then
AArch32.TakeHypTrapException(0x03);
elsif EL2Enabled() && !ELUsingAArch32(EL2) && CPTR_EL2.TAM == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif EL2Enabled() && ELUsingAArch32(EL2) && HCPTR.TAM == '1' then
AArch32.TakeHypTrapException(0x03);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && CPTR_EL3.TAM == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.AArch32SystemAccessTrap(EL3, 0x03);
else
return AMCNTENCLR1;
elsif PSTATE.EL == EL2 then
if Halted() && HaveEL(EL3) && EDSCR.SDD == '1' && boolean IMPLEMENTATION_DEFINED "EL3 trap priority when SDD == '1'" && !ELUsingAArch32(EL3) && CPTR_EL3.TAM == '1' then
UNDEFINED;
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && CPTR_EL3.TAM == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.AArch32SystemAccessTrap(EL3, 0x03);
else
return AMCNTENCLR1;
elsif PSTATE.EL == EL3 then
return AMCNTENCLR1;
MCR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b000 | 0b1101 | 0b0011 | 0b000 |
if PSTATE.EL == EL1 && EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T13 == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif PSTATE.EL == EL1 && EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T13 == '1' then
AArch32.TakeHypTrapException(0x03);
elsif IsHighestEL(PSTATE.EL) then
AMCNTENCLR1 = R[t];
else
UNDEFINED;