DBGDTRRX_EL0, Debug Data Transfer Register, Receive
The DBGDTRRX_EL0 characteristics are:
Purpose
Transfers data from an external debugger to the PE. For example, it is used by a debugger transferring commands and data to a debug target. See DBGDTR_EL0 for additional architectural mappings. It is a component of the Debug Communications Channel.
Configuration
AArch64 System register DBGDTRRX_EL0 bits [31:0] are architecturally mapped to AArch32 System register DBGDTRRXint[31:0] .
AArch64 System register DBGDTRRX_EL0 bits [31:0] are architecturally mapped to External register DBGDTRRX_EL0[31:0] .
Attributes
DBGDTRRX_EL0 is a 64-bit register.
Field descriptions
The DBGDTRRX_EL0 bit assignments are:
| 63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
| RES0 | |||||||||||||||||||||||||||||||
| Update DTRRX | |||||||||||||||||||||||||||||||
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Bits [63:32]
Reserved, RES0.
Bits [31:0]
Update DTRRX.
Reads of this register:
-
If RXfull is set to 1, return the last value written to DTRRX.
-
If RXfull is set to 0, return an UNKNOWN value.
After the read, RXfull is cleared to 0.
For the full behavior of the Debug Communications Channel, see 'The Debug Communication Channel and Instruction Transfer Register'.
The following resets apply:
On a Cold reset, this field resets to an architecturally UNKNOWN value.
On a Warm reset, the value of this field is unchanged.
Accessing the DBGDTRRX_EL0
Accesses to this register use the following encodings:
MRS <Xt>, DBGDTRRX_EL0
| op0 | op1 | CRn | CRm | op2 |
|---|---|---|---|---|
| 0b10 | 0b011 | 0b0000 | 0b0101 | 0b000 |
if Halted() then
return DBGDTRRX_EL0;
elsif PSTATE.EL == EL0 then
if !ELUsingAArch32(EL1) && MDSCR_EL1.TDCC == '1' then
if EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TGE == '1' then
AArch64.SystemAccessTrap(EL2, 0x18);
else
AArch64.SystemAccessTrap(EL1, 0x18);
elsif EL2Enabled() && !ELUsingAArch32(EL2) && MDCR_EL2.TDCC == '1' then
AArch64.SystemAccessTrap(EL2, 0x18);
elsif EL2Enabled() && !ELUsingAArch32(EL2) && (HCR_EL2.TGE == '1' || MDCR_EL2.<TDE,TDA> != '00') then
AArch64.SystemAccessTrap(EL2, 0x18);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TDCC == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.SystemAccessTrap(EL3, 0x18);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TDA == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.SystemAccessTrap(EL3, 0x18);
else
return DBGDTRRX_EL0;
elsif PSTATE.EL == EL1 then
if EL2Enabled() && !ELUsingAArch32(EL2) && MDCR_EL2.TDCC == '1' then
AArch64.SystemAccessTrap(EL2, 0x18);
elsif EL2Enabled() && !ELUsingAArch32(EL2) && MDCR_EL2.<TDE,TDA> != '00' then
AArch64.SystemAccessTrap(EL2, 0x18);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TDCC == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.SystemAccessTrap(EL3, 0x18);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TDA == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.SystemAccessTrap(EL3, 0x18);
else
return DBGDTRRX_EL0;
elsif PSTATE.EL == EL2 then
if HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TDCC == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.SystemAccessTrap(EL3, 0x18);
elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && MDCR_EL3.TDA == '1' then
if Halted() && EDSCR.SDD == '1' then
UNDEFINED;
else
AArch64.SystemAccessTrap(EL3, 0x18);
else
return DBGDTRRX_EL0;
elsif PSTATE.EL == EL3 then
return DBGDTRRX_EL0;