ID_PFR2_EL1, AArch32 Processor Feature Register 2
The ID_PFR2_EL1 characteristics are:
Purpose
Gives information about the AArch32 programmers' model.
Must be interpreted with ID_PFR0_EL1 and ID_PFR1_EL1.
For general information about the interpretation of the ID registers see 'Principles of the ID scheme for fields in ID registers'.
Configuration
AArch64 System register ID_PFR2_EL1 bits [31:0] are architecturally mapped to AArch32 System register ID_PFR2[31:0] .
Attributes
ID_PFR2_EL1 is a 64-bit register.
Field descriptions
The ID_PFR2_EL1 bit assignments are:
When AArch32 is supported at any Exception level:
Bits [63:12]
Reserved, RES0.
RAS_frac, bits [11:8]
RAS Extension fractional field. Defined values are:
| RAS_frac | Meaning |
|---|---|
| 0b0000 |
If ID_PFR0_EL1.RAS == 0b0001, RAS Extension implemented. |
| 0b0001 |
If ID_PFR0_EL1.RAS == 0b0001, as 0b0000 and adds support for additional ERXMISC<m> System registers. Error records accessed through System registers conform to RAS System Architecture v1.1, which includes simplifications to ERR<n>STATUS and support for the optional RAS Timestamp Extension. |
All other values are reserved.
This field is valid only if ID_PFR0_EL1.RAS == 0b0001.
SSBS, bits [7:4]
Speculative Store Bypassing controls in AArch64 state. Defined values are:
| SSBS | Meaning |
|---|---|
| 0b0000 |
AArch32 provides no mechanism to control the use of Speculative Store Bypassing. |
| 0b0001 |
AArch32 provides the PSTATE.SSBS mechanism to mark regions that are Speculative Store Bypass Safe. |
In Armv8.0, the permitted values are 0b0000 and 0b0001.
From Armv8.5, the only permitted value is 0b0001.
All other values are reserved.
CSV3, bits [3:0]
Speculative use of faulting data. Defined values are:
| CSV3 | Meaning |
|---|---|
| 0b0000 |
This Device does not disclose whether data loaded under speculation with a permission or domain fault can be used to form an address or generate condition codes or SVE predicate values to be used by instructions newer than the load in the speculative sequence |
| 0b0001 |
Data loaded under speculation with a permission or domain fault cannot be used to form an address or generate condition codes or SVE predicate values to be used by instructions newer than the load in the speculative sequence |
All other values are reserved.
FEAT_CSV3 implements the functionality identified by the value 0b0001.
In Armv8.0, the permitted values are 0b0000 and 0b0001.
From Armv8.5, the only permitted value is 0b0001.
If FEAT_E0PD is implemented, FEAT_CSV3 must be implemented.
Otherwise:
Bits [63:0]
Reserved, UNKNOWN.
Accessing the ID_PFR2_EL1
Accesses to this register use the following encodings:
MRS <Xt>, ID_PFR2_EL1
| op0 | op1 | CRn | CRm | op2 |
|---|---|---|---|---|
| 0b11 | 0b000 | 0b0000 | 0b0011 | 0b100 |
if PSTATE.EL == EL0 then
if IsFeatureImplemented("FEAT_IDST") then
if EL2Enabled() && HCR_EL2.TGE == '1' then
AArch64.SystemAccessTrap(EL2, 0x18);
else
AArch64.SystemAccessTrap(EL1, 0x18);
else
UNDEFINED;
elsif PSTATE.EL == EL1 then
if EL2Enabled() && HCR_EL2.TID3 == '1' then
AArch64.SystemAccessTrap(EL2, 0x18);
else
return ID_PFR2_EL1;
elsif PSTATE.EL == EL2 then
return ID_PFR2_EL1;
elsif PSTATE.EL == EL3 then
return ID_PFR2_EL1;