GICR_ICFGR<n>E, Interrupt configuration registers, n = 2 - 5
The GICR_ICFGR<n>E characteristics are:
Determines whether the corresponding PPI in the extended PPI range is edge-triggered or level-sensitive.
This register is present only when FEAT_GICv3p1 is implemented. Otherwise, direct accesses to GICR_ICFGR<n>E are RES0.
A copy of this register is provided for each Redistributor.
GICR_ICFGR<n>E is a 32-bit register.
The GICR_ICFGR<n>E bit assignments are:
|Int_config<x>, bit [x], for x = 0 to 31|
Int_config<x>, bit [x], for x = 0 to 31
Indicates whether the interrupt with ID 16n + x is level-sensitive or edge-triggered.
Int_config (bit [2x]) is RES0.
Possible values of Int_config (bit [2x+1]) are:
The corresponding interrupt is level-sensitive.
The corresponding interrupt is edge-triggered.
This field resets to an architecturally UNKNOWN value.
For each supported extended PPI, it is IMPLEMENTATION DEFINED whether software can program the corresponding Int_config field.
Accessing the GICR_ICFGR<n>E
When affinity routing is not enabled for the Security state of an interrupt in GICR_ICFGR<n>E, the corresponding bit is RES0.
When GICD_CTLR.DS==0, a register bit that corresponds to a Group 0 or Secure Group 1 interrupt is RAZ/WI to Non-secure accesses.
Bits corresponding to unimplemented interrupts are RAZ/WI.
GICR_ICFGR<n>E can be accessed through the memory-mapped interfaces:
|GIC Redistributor||SGI_base||0x0C00 + (4 * n)||GICR_ICFGR<n>E|
This interface is accessible as follows:
- When GICD_CTLR.DS == 0 accesses to this register are RW.
- When an access is Secure accesses to this register are RW.
- When an access is Non-secure accesses to this register are RW.