You copied the Doc URL to your clipboard.

ICC_IGRPEN1_EL1, Interrupt Controller Interrupt Group 1 Enable register

The ICC_IGRPEN1_EL1 characteristics are:

Purpose

Controls whether Group 1 interrupts are enabled for the current Security state.

Configuration

AArch64 System register ICC_IGRPEN1_EL1 bits [31:0] (S) are architecturally mapped to AArch32 System register ICC_IGRPEN1[31:0] (S) .

AArch64 System register ICC_IGRPEN1_EL1 bits [31:0] (NS) are architecturally mapped to AArch32 System register ICC_IGRPEN1[31:0] (NS) .

Some or all RW fields of this register have defined reset values. These apply only if the PE resets into an Exception level that is using AArch64. Otherwise, RW fields in this register reset to architecturally UNKNOWN values.

Attributes

ICC_IGRPEN1_EL1 is a 64-bit register.

Field descriptions

The ICC_IGRPEN1_EL1 bit assignments are:

6362616059585756555453525150494847464544434241403938373635343332
RES0
RES0Enable
313029282726252423222120191817161514131211109876543210

Bits [63:1]

Reserved, RES0.

Enable, bit [0]

Enables Group 1 interrupts for the current Security state.

EnableMeaning
0b0

Group 1 interrupts are disabled for the current Security state.

0b1

Group 1 interrupts are enabled for the current Security state.

Virtual accesses to this register update ICH_VMCR_EL2.VENG1.

If EL3 is present:

If the highest priority pending interrupt for that PE is a Group 1 interrupt using 1 of N model, then the interrupt will target another PE as a result of the Enable bit changing from 1 to 0.

This field resets to 0.

Accessing the ICC_IGRPEN1_EL1

Accesses to this register use the following encodings:

MRS <Xt>, ICC_IGRPEN1_EL1

op0op1CRnCRmop2
0b110b0000b11000b11000b111
if PSTATE.EL == EL0 then
    UNDEFINED;
elsif PSTATE.EL == EL1 then
    if ICC_SRE_EL1.SRE == '0' then
        AArch64.SystemAccessTrap(EL1, 0x18);
    elsif EL2Enabled() && !ELUsingAArch32(EL2) && ICH_HCR_EL2.TALL1 == '1' then
        AArch64.SystemAccessTrap(EL2, 0x18);
    elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.IMO == '1' then
        return ICV_IGRPEN1_EL1;
    elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && SCR_EL3.IRQ == '1' then
        AArch64.SystemAccessTrap(EL3, 0x18);
    elsif HaveEL(EL3) then
        if SCR_EL3.NS == '0' then
            return ICC_IGRPEN1_EL1_S;
        else
            return ICC_IGRPEN1_EL1_NS;
    else
        return ICC_IGRPEN1_EL1;
elsif PSTATE.EL == EL2 then
    if ICC_SRE_EL2.SRE == '0' then
        AArch64.SystemAccessTrap(EL2, 0x18);
    elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && SCR_EL3.IRQ == '1' then
        AArch64.SystemAccessTrap(EL3, 0x18);
    elsif HaveEL(EL3) then
        if SCR_EL3.NS == '0' then
            return ICC_IGRPEN1_EL1_S;
        else
            return ICC_IGRPEN1_EL1_NS;
    else
        return ICC_IGRPEN1_EL1;
elsif PSTATE.EL == EL3 then
    if ICC_SRE_EL3.SRE == '0' then
        AArch64.SystemAccessTrap(EL3, 0x18);
    else
        if SCR_EL3.NS == '0' then
            return ICC_IGRPEN1_EL1_S;
        else
            return ICC_IGRPEN1_EL1_NS;
              

MSR ICC_IGRPEN1_EL1, <Xt>

op0op1CRnCRmop2
0b110b0000b11000b11000b111
if PSTATE.EL == EL0 then
    UNDEFINED;
elsif PSTATE.EL == EL1 then
    if ICC_SRE_EL1.SRE == '0' then
        AArch64.SystemAccessTrap(EL1, 0x18);
    elsif EL2Enabled() && !ELUsingAArch32(EL2) && ICH_HCR_EL2.TALL1 == '1' then
        AArch64.SystemAccessTrap(EL2, 0x18);
    elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.IMO == '1' then
        ICV_IGRPEN1_EL1 = X[t];
    elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && SCR_EL3.IRQ == '1' then
        AArch64.SystemAccessTrap(EL3, 0x18);
    elsif HaveEL(EL3) then
        if SCR_EL3.NS == '0' then
            ICC_IGRPEN1_EL1_S = X[t];
        else
            ICC_IGRPEN1_EL1_NS = X[t];
    else
        ICC_IGRPEN1_EL1 = X[t];
elsif PSTATE.EL == EL2 then
    if ICC_SRE_EL2.SRE == '0' then
        AArch64.SystemAccessTrap(EL2, 0x18);
    elsif HaveEL(EL3) && !ELUsingAArch32(EL3) && SCR_EL3.IRQ == '1' then
        AArch64.SystemAccessTrap(EL3, 0x18);
    elsif HaveEL(EL3) then
        if SCR_EL3.NS == '0' then
            ICC_IGRPEN1_EL1_S = X[t];
        else
            ICC_IGRPEN1_EL1_NS = X[t];
    else
        ICC_IGRPEN1_EL1 = X[t];
elsif PSTATE.EL == EL3 then
    if ICC_SRE_EL3.SRE == '0' then
        AArch64.SystemAccessTrap(EL3, 0x18);
    else
        if SCR_EL3.NS == '0' then
            ICC_IGRPEN1_EL1_S = X[t];
        else
            ICC_IGRPEN1_EL1_NS = X[t];
              


Was this page helpful? Yes No