DBGCLAIMCLR_EL1, Debug Claim Tag Clear register
The DBGCLAIMCLR_EL1 characteristics are:
Used by software to read the values of the CLAIM tag bits, and to clear these bits to 0.
The architecture does not define any functionality for the CLAIM tag bits.
CLAIM tags are typically used for communication between the debugger and target software.
Used in conjunction with the DBGCLAIMSET_EL1 register.
External register DBGCLAIMCLR_EL1 bits [31:0] are architecturally mapped to AArch64 System register DBGCLAIMCLR_EL1[31:0] .
External register DBGCLAIMCLR_EL1 bits [31:0] are architecturally mapped to AArch32 System register DBGCLAIMCLR[31:0] .
DBGCLAIMCLR_EL1 is in the Core power domain.
This register is not affected by a Warm reset, and is not affected by an External debug reset.
An implementation must include 8 CLAIM tag bits.
DBGCLAIMCLR_EL1 is a 32-bit register.
The DBGCLAIMCLR_EL1 bit assignments are:
Reserved, RAZ/SBZ. Software can rely on these bits reading as zero, and must use a should-be-zero policy on writes. Implementations must ignore writes.
CLAIM, bits [7:0]
Read or clear CLAIM tag bits. Reading this field returns the current value of the CLAIM tag bits.
Writing a 1 to one of these bits clears the corresponding CLAIM tag bit to 0. This is an indirect write to the CLAIM tag bits. A single write operation can clear multiple CLAIM tag bits to 0.
Writing 0 to one of these bits has no effect.
On a Cold reset, this field resets to 0.
Accessing the DBGCLAIMCLR_EL1
DBGCLAIMCLR_EL1 can be accessed through the external debug interface:
This interface is accessible as follows:
- When IsCorePowered(), !DoubleLockStatus(), !OSLockStatus() and SoftwareLockStatus() accesses to this register are RO.
- When IsCorePowered(), !DoubleLockStatus(), !OSLockStatus() and !SoftwareLockStatus() accesses to this register are RW.
- Otherwise accesses to this register generate an error response.