You copied the Doc URL to your clipboard.

EDPIDR0, External Debug Peripheral Identification Register 0

The EDPIDR0 characteristics are:

Purpose

Provides information to identify an external debug component.

For more information see 'About the Peripheral identification scheme' in the Arm® Architecture Reference Manual, Armv8, for Armv8-A architecture profile, section H8 (About the External Debug Registers).

Configuration

It is IMPLEMENTATION DEFINED whether EDPIDR0 is implemented in the Core power domain or in the Debug power domain.

Implementation of this register is OPTIONAL.

If ARMv8.3-DoPD is implemented, this register is in the Core power domain. If ARMv8.3-DoPD is not implemented, this register is in the Debug power domain.

This register is required for CoreSight compliance.

Attributes

EDPIDR0 is a 32-bit register.

Field descriptions

The EDPIDR0 bit assignments are:

313029282726252423222120191817161514131211109876543210
RES0PART_0

Bits [31:8]

Reserved, RES0.

PART_0, bits [7:0]

Part number, least significant byte.

Accessing the EDPIDR0

EDPIDR0 can be accessed through the external debug interface:

ComponentOffsetInstance
Debug0xFE0EDPIDR0

This interface is accessible as follows:

  • When ARMv8.3-DoPD is not implemented or IsCorePowered() accesses to this register are RO.
  • Otherwise accesses to this register generate an error response.


Was this page helpful? Yes No