You copied the Doc URL to your clipboard.

MPAMF_ECR, MPAM Error Control Register

The MPAMF_ECR characteristics are:

Purpose

MPAMF_ECR is a 32-bit read-write register that controls MPAM error interrupts for this MSC. MPAMF_ECR_s controls Secure MPAM error handling. MPAMF_ECR_ns controls Non-secure MPAM error handling.

Configuration

The power domain of MPAMF_ECR is IMPLEMENTATION DEFINED.

If a MSC cannot encounter any of the error conditions listed in section 15.1, both the MPAMF_ESR and MPAMF_ECR must be RAZ/WI.

Attributes

MPAMF_ECR is a 32-bit register.

Field descriptions

The MPAMF_ECR bit assignments are:

313029282726252423222120191817161514131211109876543210
RES0INTEN

Bits [31:1]

Reserved, RES0.

INTEN, bit [0]

Interrupt Enable.

INTENMeaning
0b0

MPAM error interrupts are not generated.

0b1

MPAM error interrupts are generated.

Accessing the MPAMF_ECR

This register is within the MPAM feature page memory frames. In a system that supports Secure and Non-secure memory maps, there must be both Secure and Non-secure MPAM feature pages.

MPAMF_ECR_s must be accessible from the Secure MPAM feature page. MPAMF_ECR_ns must be accessible from the Non-secure MPAM feature page.

MPAMF_ECR_s and MPAMF_ECR_ns must be separate registers. The Secure instance (MPAMF_ECR_s) accesses the error interrupt controls used for Secure PARTIDs, and the Non-secure instance (MPAMF_ECR_ns) accesses the error interrupt controls used for Non-secure PARTIDs.

MPAMF_ECR can be accessed through the memory-mapped interfaces:

ComponentFrameOffsetInstance
MPAMMPAMF_BASE_s0x00F0MPAMF_ECR_s

Accesses on this interface are RW.

ComponentFrameOffsetInstance
MPAMMPAMF_BASE_ns0x00F0MPAMF_ECR_ns

Accesses on this interface are RW.



Was this page helpful? Yes No