STUMINH, STUMINLH
Atomic unsigned minimum on halfword in memory, without return, atomically loads a 16-bit halfword from memory, compares it against the value held in a register, and stores the smaller value back to memory, treating the values as unsigned numbers.
- STUMINH has no memory ordering semantics.
- STUMINLH stores to memory with release semantics, as described in Load-Acquire, Store-Release.
For information about memory accesses see Load/Store addressing modes.
This is an alias of LDUMINH, LDUMINAH, LDUMINALH, LDUMINLH. This means:
- The encodings in this description are named to match the encodings of LDUMINH, LDUMINAH, LDUMINALH, LDUMINLH.
- The description of LDUMINH, LDUMINAH, LDUMINALH, LDUMINLH gives the operational pseudocode for this instruction.
Integer
(Armv8.1)
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | R | 1 | Rs | 0 | 1 | 1 | 1 | 0 | 0 | Rn | 1 | 1 | 1 | 1 | 1 | ||||||||
| size | A | opc | Rt | ||||||||||||||||||||||||||||
No memory ordering (R == 0)
is equivalent to
and is always the preferred disassembly.
Release (R == 1)
is equivalent to
and is always the preferred disassembly.
Assembler Symbols
| <Ws> |
Is the 32-bit name of the general-purpose register holding the data value to be operated on with the contents of the memory location, encoded in the "Rs" field. |
| <Xn|SP> |
Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field. |
Operation
The description of LDUMINH, LDUMINAH, LDUMINALH, LDUMINLH gives the operational pseudocode for this instruction.
Operational information
If PSTATE.DIT is 1, the timing of this instruction is insensitive to the value of the data being loaded or stored.