You copied the Doc URL to your clipboard.

FADD (immediate)

Floating-point add immediate (predicated).

Add an immediate to each active floating-point element of the source vector, and destructively place the results in the corresponding elements of the source vector. The immediate may take the value +0.5 or +1.0 only. Inactive elements in the destination vector register remain unmodified.

313029282726252423222120191817161514131211109876543210
01100101size011000100Pg0000i1Zdn

SVE

FADD <Zdn>.<T>, <Pg>/M, <Zdn>.<T>, <const>

if !HaveSVE() then UNDEFINED;
if size == '00' then UNDEFINED;
integer esize = 8 << UInt(size);
integer g = UInt(Pg);
integer dn = UInt(Zdn);
bits(esize) imm = if i1 == '0' then FPPointFive('0') else FPOne('0');

Assembler Symbols

<Zdn>

Is the name of the source and destination scalable vector register, encoded in the "Zdn" field.

<T> Is the size specifier, encoded in size:
size <T>
00 RESERVED
01 H
10 S
11 D
<Pg>

Is the name of the governing scalable predicate register P0-P7, encoded in the "Pg" field.

<const> Is the floating-point immediate value, encoded in i1:
i1 <const>
0 #0.5
1 #1.0

Operation

CheckSVEEnabled();
integer elements = VL DIV esize;
bits(PL) mask = P[g];
bits(VL) operand1 = Z[dn];
bits(VL) result;

for e = 0 to elements-1
    bits(esize) element1 = Elem[operand1, e, esize];
    if ElemP[mask, e, esize] == '1' then
        Elem[result, e, esize] = FPAdd(element1, imm, FPCR);
    else
        Elem[result, e, esize] = element1;

Z[dn] = result;

Operational information

This instruction might be immediately preceded in program order by a MOVPRFX instruction that conforms to all of the following requirements, otherwise the behavior of either or both instructions is unpredictable:

  • The MOVPRFX instruction must specify the same destination register as this instruction.
  • The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.
The MOVPRFX instructions that can be used with this instruction are as follows:
  • An unpredicated MOVPRFX instruction.
  • A predicated MOVPRFX instruction using the same governing predicate register and source element size as this instruction.