Floating-point trigonometric multiply-add coefficient.
The FTMAD instruction calculates the series terms for either sin(x) or cos(x), where the argument x has been adjusted to be in the range -π/4 < x ≤ π/4.
To calculate the series terms of sin(x) and cos(x) the initial source operands of FTMAD should be zero in the first source vector and x2 in the second source vector. The FTMAD instruction is then executed eight times to calculate the sum of eight series terms, which gives a result of sufficient precision.
The FTMAD instruction multiplies each element of the first source vector by the absolute value of the corresponding element of the second source vector and performs a fused addition of each product with a value obtained from a table of hard-wired coefficients, and places the results destructively in the first source vector.
The coefficients are different for sin(x) and cos(x), and are selected by a combination of the sign bit in the second source element and an immediate index in the range 0 to 7.
This instruction is unpredicated.
if !HaveSVE() then UNDEFINED; if size == '00' then UNDEFINED; integer esize = 8 << UInt(size); integer dn = UInt(Zdn); integer m = UInt(Zm); integer imm = UInt(imm3);
Is the name of the first source and destination scalable vector register, encoded in the "Zdn" field.
Is the size specifier,
Is the name of the second source scalable vector register, encoded in the "Zm" field.
Is the unsigned immediate operand, in the range 0 to 7, encoded in the "imm3" field.
CheckSVEEnabled(); integer elements = VL DIV esize; bits(VL) operand1 = Z[dn]; bits(VL) operand2 = Z[m]; bits(VL) result; for e = 0 to elements-1 bits(esize) element1 = Elem[operand1, e, esize]; bits(esize) element2 = Elem[operand2, e, esize]; Elem[result, e, esize] = FPTrigMAdd(imm, element1, element2, FPCR); Z[dn] = result;
This instruction might be immediately preceded in program order by a MOVPRFX instruction that conforms to all of the following requirements, otherwise the behavior of either or both instructions is unpredictable:
- The MOVPRFX instruction must specify the same destination register as this instruction.
- The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.
- An unpredicated MOVPRFX instruction.