You copied the Doc URL to your clipboard.

MOV (immediate, predicated, merging)

Move signed integer immediate to vector elements (merging).

Move a signed integer immediate to each active element in the destination vector. Inactive elements in the destination vector register remain unmodified.

The immediate operand is a signed value in the range -128 to +127, and for element widths of 16 bits or higher it may also be a signed multiple of 256 in the range -32768 to +32512 (excluding 0).

The immediate is encoded in 8 bits with an optional left shift by 8. The preferred disassembly when the shift option is specified is "#<simm8>, LSL #8". However an assembler and disassembler may also allow use of the shifted 16-bit value unless the immediate is 0 and the shift amount is 8, which must be unambiguously described as "#0, LSL #8".

This is an alias of CPY (immediate, merging). This means:

313029282726252423222120191817161514131211109876543210
00000101size01Pg01shimm8Zd

SVE

MOV <Zd>.<T>, <Pg>/M, #<imm>{, <shift>}

is equivalent to

CPY <Zd>.<T>, <Pg>/M, #<imm>{, <shift>}

and is always the preferred disassembly.

Assembler Symbols

<Zd>

Is the name of the destination scalable vector register, encoded in the "Zd" field.

<T> Is the size specifier, encoded in size:
size <T>
00 B
01 H
10 S
11 D
<Pg>

Is the name of the governing scalable predicate register, encoded in the "Pg" field.

<imm>

Is a signed immediate in the range -128 to 127, encoded in the "imm8" field.

<shift> Is the optional left shift to apply to the immediate, defaulting to LSL #0 and encoded in sh:
sh <shift>
0 LSL #0
1 LSL #8

Operation

The description of CPY (immediate, merging) gives the operational pseudocode for this instruction.

Operational information

This instruction might be immediately preceded in program order by a MOVPRFX instruction that conforms to all of the following requirements, otherwise the behavior of either or both instructions is unpredictable:

  • The MOVPRFX instruction must specify the same destination register as this instruction.
  • The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.
The MOVPRFX instructions that can be used with this instruction are as follows:
  • An unpredicated MOVPRFX instruction.
  • A predicated MOVPRFX instruction using the same governing predicate register and source element size as this instruction.