You copied the Doc URL to your clipboard.

LD1ROB (scalar plus scalar)

Contiguous load and replicate thirty-two bytes (scalar index).

Load thirty-two contiguous bytes to elements of a 256-bit (octaword) vector from the memory address generated by a 64-bit scalar base address and scalar index which is added to the base address.

Inactive elements will not cause a read from Device memory or signal a fault, and are set to zero.

The resulting 256-bit vector is then replicated to fill the destination vector. The instruction requires that the current vector length is at least 256 bits, and if the current vector length is not an integer multiple of 256 bits then the trailing bits in the destination vector are set to zero.

Only the first thirty-two predicate elements are used and higher numbered predicate elements are ignored.

ID_AA64ZFR0_EL1.F64MM indicates whether this instruction is implemented.

313029282726252423222120191817161514131211109876543210
10100100001Rm000PgRnZt
msz<1>msz<0>ssz

LD1ROB { <Zt>.B }, <Pg>/Z, [<Xn|SP>, <Xm>]

if !HaveSVEFP64MatMulExt() then UNDEFINED;
if Rm == '11111' then UNDEFINED;
integer t = UInt(Zt);
integer n = UInt(Rn);
integer m = UInt(Rm);
integer g = UInt(Pg);
integer esize = 8;

Assembler Symbols

<Zt>

Is the name of the scalable vector register to be transferred, encoded in the "Zt" field.

<Pg>

Is the name of the governing scalable predicate register P0-P7, encoded in the "Pg" field.

<Xn|SP>

Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field.

<Xm>

Is the 64-bit name of the general-purpose offset register, encoded in the "Rm" field.

Operation

CheckSVEEnabled();
if VL < 256 then UNDEFINED;
integer elements = 256 DIV esize;
bits(64) base;
bits(64) addr;
bits(PL) mask = P[g]; // low bits only
bits(64) offset;
bits(256) result;
constant integer mbytes = esize DIV 8;

if HaveMTEExt() then SetTagCheckedInstruction(TRUE);

if n == 31 then
    if LastActiveElement(mask, esize) >= 0 || 
          ConstrainUnpredictableBool(Unpredictable_CHECKSPNONEACTIVE) then 
        CheckSPAlignment();
    base = SP[];
else
    base = X[n];

offset = X[m];

addr = base + UInt(offset) * mbytes;
for e = 0 to elements-1
    if ElemP[mask, e, esize] == '1' then
        Elem[result, e, esize] = Mem[addr, mbytes, AccType_NORMAL];
    else
        Elem[result, e, esize] = Zeros();
    addr = addr + mbytes;

Z[t] = ZeroExtend(Replicate(result, VL DIV 256), VL);