You copied the Doc URL to your clipboard.

FCVTZU (vector, fixed-point)

Floating-point Convert to Unsigned fixed-point, rounding toward Zero (vector). This instruction converts a scalar or each element in a vector from floating-point to fixed-point unsigned integer using the Round towards Zero rounding mode, and writes the result to the general-purpose destination register.

A floating-point exception can be generated by this instruction. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR, or a synchronous exception being generated. For more information, see Floating-point exception traps.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the Security state and Exception level in which the instruction is executed, an attempt to execute the instruction might be trapped.

It has encodings from 2 classes: Scalar and Vector

Scalar

313029282726252423222120191817161514131211109876543210
011111110!= 0000immb111111RnRd
Uimmh
integer d = UInt(Rd);
integer n = UInt(Rn);

if immh == '000x' || (immh == '001x' && !HaveFP16Ext()) then UNDEFINED;
integer esize = if immh == '1xxx' then 64 else if immh == '01xx' then 32 else 16;
integer datasize = esize;
integer elements = 1;

integer fracbits = (esize * 2) - UInt(immh:immb);
boolean unsigned = (U == '1');
FPRounding rounding = FPRounding_ZERO;

Vector

313029282726252423222120191817161514131211109876543210
0Q1011110!= 0000immb111111RnRd
Uimmh

FCVTZU <Vd>.<T>, <Vn>.<T>, #<fbits>

integer d = UInt(Rd);
integer n = UInt(Rn);

if immh == '0000' then SEE(asimdimm);
if immh == '000x' || (immh == '001x' && !HaveFP16Ext()) then UNDEFINED;
if immh<3>:Q == '10' then UNDEFINED;
integer esize = if immh == '1xxx' then 64 else if immh == '01xx' then 32 else 16;
integer datasize = if Q == '1' then 128 else 64;
integer elements = datasize DIV esize;

integer fracbits = (esize * 2) - UInt(immh:immb);
boolean unsigned = (U == '1');
FPRounding rounding = FPRounding_ZERO;

Assembler Symbols

<V> Is a width specifier, encoded in immh:
immh <V>
000x RESERVED
001x H
01xx S
1xxx D
<d>

Is the number of the SIMD&FP destination register, in the "Rd" field.

<n>

Is the number of the first SIMD&FP source register, encoded in the "Rn" field.

<Vd>

Is the name of the SIMD&FP destination register, encoded in the "Rd" field.

<T> Is an arrangement specifier, encoded in immh:Q:
immh Q <T>
0000 x SEE Advanced SIMD modified immediate
0001 x RESERVED
001x 0 4H
001x 1 8H
01xx 0 2S
01xx 1 4S
1xxx 0 RESERVED
1xxx 1 2D
<Vn>

Is the name of the SIMD&FP source register, encoded in the "Rn" field.

<fbits> For the scalar variant: is the number of fractional bits, in the range 1 to the operand width, encoded in immh:immb:
immh <fbits>
000x RESERVED
001x (32-Uint(immh:immb))
01xx (64-UInt(immh:immb))
1xxx (128-UInt(immh:immb))
For the vector variant: is the number of fractional bits, in the range 1 to the element width, encoded in immh:immb:
immh <fbits>
0000 SEE Advanced SIMD modified immediate
0001 RESERVED
001x (32-Uint(immh:immb))
01xx (64-UInt(immh:immb))
1xxx (128-UInt(immh:immb))

Operation

CheckFPAdvSIMDEnabled64();
bits(datasize) operand = V[n];
bits(datasize) result;
bits(esize) element;

for e = 0 to elements-1
    element = Elem[operand, e, esize];
    Elem[result, e, esize] = FPToFixed(element, fracbits, unsigned, FPCR, rounding);

V[d] = result;