Load-Acquire RCpc Register derives an address from a base register value, loads a 32-bit word or 64-bit doubleword from the derived address in memory, and writes it to a register.
The instruction has memory ordering semantics as described in Load-Acquire, Load-AcquirePC, and Store-Release, except that:
- There is no ordering requirement, separate from the requirements of a Load-AcquirePC or a Store-Release, created by having a Store-Release followed by a Load-AcquirePC instruction.
- The reading of a value written by a Store-Release by a Load-AcquirePC instruction by the same observer does not make the write of the Store-Release globally observed.
This difference in memory ordering is not described in the pseudocode.
For information about memory accesses, see Load/Store addressing modes.
integer n = UInt(Rn); integer t = UInt(Rt); integer elsize = 8 << UInt(size); integer regsize = if elsize == 64 then 64 else 32; boolean tag_checked = n != 31;
Is the 32-bit name of the general-purpose register to be loaded, encoded in the "Rt" field.
Is the 64-bit name of the general-purpose register to be loaded, encoded in the "Rt" field.
Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field.
bits(64) address; bits(elsize) data; constant integer dbytes = elsize DIV 8; if HaveMTEExt() then SetTagCheckedInstruction(tag_checked); if n == 31 then CheckSPAlignment(); address = SP; else address = X[n]; data = Mem[address, dbytes, AccType_ORDERED]; X[t] = ZeroExtend(data, regsize);
If PSTATE.DIT is 1, the timing of this instruction is insensitive to the value of the data being loaded or stored.