You copied the Doc URL to your clipboard.

RRXS

Rotate Right with Extend, setting flags provides the value of the contents of a register shifted right by one place, with the Carry flag shifted into bit[31].

If the destination register is not the PC, this instruction updates the condition flags based on the result, and bit[0] is shifted into the Carry flag.

The field descriptions for <Rd> identify the encodings where the PC is permitted as the destination register. ARM deprecates any use of these encodings. However, when the destination register is the PC:

  • The PE branches to the address written to the PC, and restores PSTATE from SPSR_<current_mode>.
  • The PE checks SPSR_<current_mode> for an illegal return event. See Illegal return events from AArch32 state.
  • The instruction is undefined in Hyp mode.
  • The instruction is constrained unpredictable in User mode and System mode.

This is an alias of MOV, MOVS (register). This means:

It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T3 ) .

A1

313029282726252423222120191817161514131211109876543210
!= 111100011011(0)(0)(0)(0)Rd00000110Rm
condSimm5type

MOVS, rotate right with extend

RRXS{<c>}{<q>} {<Rd>,} <Rm>

is equivalent to

MOVS{<c>}{<q>} <Rd>, <Rm>, RRX

and is always the preferred disassembly.

T3

15141312111098765432101514131211109876543210
1110101001011111(0)000Rd0011Rm
Simm3imm2type

MOVS, rotate right with extend

RRXS{<c>}{<q>} {<Rd>,} <Rm>

is equivalent to

MOVS{<c>}{<q>} <Rd>, <Rm>, RRX

and is always the preferred disassembly.

Assembler Symbols

<c>

See Standard assembler syntax fields.

<q>

See Standard assembler syntax fields.

<Rd>

For encoding A1: is the general-purpose destination register, encoded in the "Rd" field. Arm deprecates using the PC as the destination register, but if the PC is used, the instruction performs an exception return, that restores PSTATE from SPSR_<current_mode>.

For encoding T3: is the general-purpose destination register, encoded in the "Rd" field.

<Rm>

For encoding A1: is the general-purpose source register, encoded in the "Rm" field. The PC can be used, but this is deprecated.

For encoding T3: is the general-purpose source register, encoded in the "Rm" field.

Operation

The description of MOV, MOVS (register) gives the operational pseudocode for this instruction.

Was this page helpful? Yes No