ROR (register)
Rotate Right (register) provides the value of the contents of a register rotated by a variable number of bits. The bits that are rotated off the right end are inserted into the vacated bit positions on the left. The variable number of bits is read from the bottom byte of a register.
This is an alias of MOV, MOVS (register-shifted register). This means:
- The encodings in this description are named to match the encodings of MOV, MOVS (register-shifted register).
- The description of MOV, MOVS (register-shifted register) gives the operational pseudocode for this instruction.
It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T1 and T2 ) .
A1
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
!= 1111 | 0 | 0 | 0 | 1 | 1 | 0 | 1 | 0 | (0) | (0) | (0) | (0) | Rd | Rs | 0 | 1 | 1 | 1 | Rm | ||||||||||||
cond | S | stype |
Not flag setting
ROR{<c>}{<q>} {<Rd>,} <Rm>, <Rs>
is equivalent to
MOV{<c>}{<q>} <Rd>, <Rm>, ROR <Rs>
and is always the preferred disassembly.
T1
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
0 | 1 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | Rs | Rdm | ||||
op |
Rotate right
ROR<c>{<q>} {<Rdm>,} <Rdm>, <Rs> // (Inside IT block)
is equivalent to
MOV<c>{<q>} <Rdm>, <Rdm>, ROR <Rs>
and is the preferred disassembly when InITBlock().
T2
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 0 | Rm | 1 | 1 | 1 | 1 | Rd | 0 | 0 | 0 | 0 | Rs | |||||||||
stype | S |
Not flag setting
ROR<c>.W {<Rd>,} <Rm>, <Rs> // (Inside IT block, and <Rd>, <Rm>, <shift>, <Rs> can be represented in T1)
ROR{<c>}{<q>} {<Rd>,} <Rm>, <Rs>
is equivalent to
MOV{<c>}{<q>} <Rd>, <Rm>, ROR <Rs>
and is always the preferred disassembly.
Assembler Symbols
<c> |
<q> |
<Rdm> |
Is the first general-purpose source register and the destination register, encoded in the "Rdm" field. |
<Rd> |
Is the general-purpose destination register, encoded in the "Rd" field. |
<Rm> |
Is the first general-purpose source register, encoded in the "Rm" field. |
<Rs> |
Is the second general-purpose source register holding a rotate amount in its bottom 8 bits, encoded in the "Rs" field. |
Operation
The description of MOV, MOVS (register-shifted register) gives the operational pseudocode for this instruction.