VMUL (by scalar)
Vector Multiply multiplies each element in a vector by a scalar, and places the results in a second vector.
For more information about scalars see Advanced SIMD scalars.
Depending on settings in the CPACR, NSACR, and HCPTR registers, and the Security state and PE mode in which the instruction is executed, an attempt to execute the instruction might be undefined, or trapped to Hyp mode. For more information see Enabling Advanced SIMD and floating-point support.
It has encodings from the following instruction sets: A32 ( A1 ) and T32 ( T1 ) .
A1
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
1 | 1 | 1 | 1 | 0 | 0 | 1 | Q | 1 | D | != 11 | Vn | Vd | 1 | 0 | 0 | F | N | 1 | M | 0 | Vm | ||||||||||
size |
if size == '11' then SEE "Related encodings"; if size == '00' || (F == '1' && size == '01' && !HaveFP16Ext()) then UNDEFINED; if Q == '1' && (Vd<0> == '1' || Vn<0> == '1') then UNDEFINED; unsigned = FALSE; // "Don't care" value: TRUE produces same functionality floating_point = (F == '1'); long_destination = FALSE; d = UInt(D:Vd); n = UInt(N:Vn); regs = if Q == '0' then 1 else 2; if size == '01' then esize = 16; elements = 4; m = UInt(Vm<2:0>); index = UInt(M:Vm<3>); if size == '10' then esize = 32; elements = 2; m = UInt(Vm); index = UInt(M);
T1
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
1 | 1 | 1 | Q | 1 | 1 | 1 | 1 | 1 | D | != 11 | Vn | Vd | 1 | 0 | 0 | F | N | 1 | M | 0 | Vm | ||||||||||
size |
if size == '11' then SEE "Related encodings"; if F == '1' && size == '01' && InITBlock() then UNPREDICTABLE; if size == '00' || (F == '1' && size == '01' && !HaveFP16Ext()) then UNDEFINED; if Q == '1' && (Vd<0> == '1' || Vn<0> == '1') then UNDEFINED; unsigned = FALSE; // "Don't care" value: TRUE produces same functionality floating_point = (F == '1'); long_destination = FALSE; d = UInt(D:Vd); n = UInt(N:Vn); regs = if Q == '0' then 1 else 2; if size == '01' then esize = 16; elements = 4; m = UInt(Vm<2:0>); index = UInt(M:Vm<3>); if size == '10' then esize = 32; elements = 2; m = UInt(Vm); index = UInt(M);
CONSTRAINED UNPREDICTABLE behavior
If F == '1' && size == '01' && InITBlock(), then one of the following behaviors must occur:
- The instruction is undefined.
- The instruction executes as if it passes the Condition code check.
- The instruction executes as NOP. This means it behaves as if it fails the Condition code check.
Related encodings: See Advanced SIMD data-processing for the T32 instruction set, or Advanced SIMD data-processing for the A32 instruction set.
Assembler Symbols
<c> |
For encoding A1: see Standard assembler syntax fields. This encoding must be unconditional. |
For encoding T1: see Standard assembler syntax fields. |
<q> |
<dt> |
Is the data type for the scalar and the elements of the operand vector,
encoded in
F:size:
|
<Qd> |
Is the 128-bit name of the SIMD&FP destination register, encoded in the "D:Vd" field as <Qd>*2. |
<Qn> |
Is the 128-bit name of the first SIMD&FP source register, encoded in the "N:Vn" field as <Qn>*2. |
<Dd> |
Is the 64-bit name of the SIMD&FP destination register, encoded in the "D:Vd" field. |
<Dn> |
Is the 64-bit name of the first SIMD&FP source register, encoded in the "N:Vn" field. |
<Dm> |
Is the 64-bit name of the second SIMD&FP source register. When <dt> is I16 or F16, this is encoded in the "Vm<2:0>" field. Otherwise it is encoded in the "Vm" field. |
<index> |
Is the element index. When <dt> is I16 or F16, this is in the range 0 to 3 and is encoded in the "M:Vm<3>" field. Otherwise it is in the range 0 to 1 and is encoded in the "M" field. |
Operation
if ConditionPassed() then EncodingSpecificOperations(); CheckAdvSIMDEnabled(); op2 = Elem[Din[m],index,esize]; op2val = Int(op2, unsigned); for r = 0 to regs-1 for e = 0 to elements-1 op1 = Elem[Din[n+r],e,esize]; op1val = Int(op1, unsigned); if floating_point then Elem[D[d+r],e,esize] = FPMul(op1, op2, StandardFPSCRValue()); else if long_destination then Elem[Q[d>>1],e,2*esize] = (op1val*op2val)<2*esize-1:0>; else Elem[D[d+r],e,esize] = (op1val*op2val)<esize-1:0>;