AMCNTENCLR1, Activity Monitors Count Enable Clear Register 1
The AMCNTENCLR1 characteristics are:
Disable control bits for the auxiliary activity monitors event counters, AMEVCNTR1<n>.
External register AMCNTENCLR1 bits [31:0] are architecturally mapped to AArch64 System register AMCNTENCLR1_EL0[31:0] .
External register AMCNTENCLR1 bits [31:0] are architecturally mapped to AArch32 System register AMCNTENCLR1[31:0] .
The power domain of AMCNTENCLR1 is IMPLEMENTATION DEFINED. Some or all RW fields of this register have defined reset values. These apply only on a reset of the reset domain in which the register is implemented. The register is not affected by a reset of any other reset domain.
This register is present only when AMUv1 is implemented. Otherwise, direct accesses to AMCNTENCLR1 are RES0.
AMCNTENCLR1 is a 32-bit register.
The AMCNTENCLR1 bit assignments are:
|P<n>, bit [n]|
P<n>, bit [n], for n = 0 to 31
Activity monitor event counter disable bit for AMEVCNTR1<n>.
Bits [31:N] are RAZ/WI. N is the value in AMCGCR.CG1NC.
Possible values of each bit are:
When read, means that AMEVCNTR1<n> is disabled. When written, has no effect.
On a Cold reset, this field resets to 0.
Accessing the AMCNTENCLR1
If the number of auxiliary activity monitor event counters implemented is zero, reads and writes of AMCNTENCLR1 are CONSTRAINED UNPREDICTABLE, and accesses to the register behave as RAZ/WI.
The number of auxiliary activity monitor event counters implemented is zero exactly when AMCFGR.NCG == 0b0000.
AMCNTENCLR1 can be accessed through the memory-mapped interfaces:
Access on this interface is RO.