AMCNTENSET1, Activity Monitors Count Enable Set Register 1
The AMCNTENSET1 characteristics are:
Enable control bits for the auxiliary activity monitors event counters, AMEVCNTR1<n>.
External register AMCNTENSET1 bits [31:0] are architecturally mapped to AArch64 System register AMCNTENSET1_EL0[31:0] .
External register AMCNTENSET1 bits [31:0] are architecturally mapped to AArch32 System register AMCNTENSET1[31:0] .
The power domain of AMCNTENSET1 is IMPLEMENTATION DEFINED. Some or all RW fields of this register have defined reset values. These apply only on a reset of the reset domain in which the register is implemented. The register is not affected by a reset of any other reset domain.
This register is present only when AMUv1 is implemented. Otherwise, direct accesses to AMCNTENSET1 are RES0.
AMCNTENSET1 is a 32-bit register.
The AMCNTENSET1 bit assignments are:
|P<n>, bit [n]|
P<n>, bit [n], for n = 0 to 31
Activity monitor event counter enable bit for AMEVCNTR1<n>.
Bits [31:N] are RAZ/WI. N is the value in AMCGCR.CG1NC.
Possible values of each bit are:
When read, means that AMEVCNTR1<n> is disabled. When written, has no effect.
On a Cold reset, this field resets to 0.
Accessing the AMCNTENSET1
If the number of auxiliary activity monitor event counters implemented is zero, reads and writes of AMCNTENSET1 are CONSTRAINED UNPREDICTABLE, and accesses to the register behave as RAZ/WI.
The number of auxiliary activity monitor counters implemented is zero exactly when AMCFGR.NCG == 0b0000.
AMCNTENSET1 can be accessed through the memory-mapped interfaces:
Access on this interface is RO.