GICR_IGROUPR<n>E, Interrupt Group Registers, n = 1 - 2
The GICR_IGROUPR<n>E characteristics are:
Purpose
Controls whether the corresponding PPI is in Group 0 or Group 1.
Configuration
RW fields in this register reset to architecturally UNKNOWN values.
This register is present only when GIC, >=3.1 is implemented. Otherwise, direct accesses to GICR_IGROUPR<n>E are RES0.
When GICD_CLTR.DS==0, this register is Secure.
A copy of this register is provided for each Redistributor.
Attributes
GICR_IGROUPR<n>E is a 32-bit register.
Field descriptions
The GICR_IGROUPR<n>E bit assignments are:
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Group_status_bit<x>, bit [x], for x = 0 to 31 |
Group_status_bit<x>, bit [x], for x = 0 to 31
Group status bit.
Group_status_bit<x> | Meaning |
---|---|
0b0 |
When GICD_CTLR.DS==1, the corresponding interrupt is Group 0. When GICD_CTLR.DS==0, the corresponding interrupt is Secure. |
0b1 |
When GICD_CTLR.DS==1, the corresponding interrupt is Group 1. When GICD_CTLR.DS==0, the corresponding interrupt is Non-secure Group 1. |
This field resets to an architecturally UNKNOWN value.
If affinity routing is enabled for the Security state of an interrupt, the bit that corresponds to the interrupt is concatenated with the equivalent bit in GICR_IGRPMODR<n>E to form a 2-bit field that defines an interrupt group. The encoding of this field is described in GICR_IGRPMODR<n>E.
If affinity routing is disabled for the Security state of an interrupt, the bit is RES0.
For INTID m, when DIV and MOD are the integer division and modulo operations:
- The corresponding GICR_IGROUPR<n>E number, n, is given by n = (m-1024) DIV 32.
- The offset of the required GICR_IGROUPR<n>E is (0x080 + (4*n)).
- The bit number of the required group modifier bit in this register is (m-1024) MOD 32.
Accessing the GICR_IGROUPR<n>E
When affinity routing is not enabled for the Security state of an interrupt in GICR_IGROUPR<n>E, the corresponding bit is RES0.
When GICD_CTLR.DS==0, the register is RAZ/WI to Non-secure accesses.
Bits corresponding to unimplemented interrupts are RAZ/WI.
GICR_IGROUPR<n>E can be accessed through the memory-mapped interfaces:
Component | Frame | Offset | Instance |
---|---|---|---|
GIC Redistributor | SGI_base | 0x0080 + 4n | GICR_IGROUPR<n>E |
This interface is accessible as follows:
- When GICD_CTLR.DS == 0b0 accesses to this register are RW.
- When IsAccessSecure() accesses to this register are RW.
- When !IsAccessSecure() accesses to this register are RW.