You copied the Doc URL to your clipboard.

GICV_BPR, Virtual Machine Binary Point Register

The GICV_BPR characteristics are:


Defines the point at which the priority value fields split into two parts, the group priority field and the subpriority field. The group priority field determines Group 0 interrupt preemption.

This register corresponds to GICC_BPR in the physical CPU interface.


GICH_LR<n>.Group determines whether a virtual interrupt is Group 0 or Group 1.


RW fields in this register reset to architecturally UNKNOWN values.

This register is available when the GIC implementation supports interrupt virtualization.

When GICV_CTLR.CBPR == 1, this register determines interrupt preemption for both Group 0 and Group 1 interrupts.


GICV_BPR is a 32-bit register.

Field descriptions

The GICV_BPR bit assignments are:


Bits [31:3]

Reserved, RES0.

Binary_Point, bits [2:0]

Controls how the 8-bit interrupt priority field is split into a group priority field, that determines interrupt preemption, and a subpriority field.

For information about how this field determines the interrupt priority bits assigned to the group priority field, see Priority grouping for Group 0 interrupts, or Group 1 interrupts when CBPR==1

This field resets to an architecturally UNKNOWN value.

The Binary_Point field of this register is aliased to GICH_VMCR.VBPR0.

Accessing the GICV_BPR

This register is used only when System register access is not enabled. When System register access is enabled:

  • For AArch32 implementations, ICC_BPR0 provides equivalent functionality.
  • For AArch64 implementations, ICC_BPR0_EL1 provides equivalent functionality.

GICV_BPR can be accessed through the memory-mapped interfaces:

GIC Virtual CPU interface0x0008GICV_BPR

This interface is accessible as follows:

  • When GICD_CTLR.DS == 0b0 accesses to this register are RW.
  • When IsAccessSecure() accesses to this register are RW.
  • When !IsAccessSecure() accesses to this register are RW.