GICV_PMR, Virtual Machine Priority Mask Register
The GICV_PMR characteristics are:
This register provides a virtual interrupt priority filter. Only virtual interrupts with a higher priority than the value in this register are signaled to the PE.
Higher interrupt priority corresponds to a lower value of the Priority field.
This register corresponds to the physical CPU interface register GICC_PMR.
RW fields in this register reset to architecturally UNKNOWN values.
This register is available when the GIC implementation supports interrupt virtualization.
The Priority field of this register is aliased to GICH_VMCR.VMPR, to enable state to be switched easily between virtual machines during context-switching.
GICV_PMR is a 32-bit register.
The GICV_PMR bit assignments are:
Priority, bits [7:0]
The priority mask level for the virtual CPU interface. If the priority of the interrupt is higher than the value indicated by this field, the interface signals the interrupt to the PE.
If the GIC implementation supports fewer than 256 priority levels some bits might be RAZ/WI, as follows:
- For 128 supported levels, bit  = 0b0.
- For 64 supported levels, bits [1:0] = 0b00.
- For 32 supported levels, bits [2:0] = 0b000.
- For 16 supported levels, bits [3:0] = 0b0000.
See Interrupt prioritization, section 4.8 of the GICv3 Architecture Specification for more information.
This field resets to an architecturally UNKNOWN value.
Accessing the GICV_PMR
This register is used only when System register access is not enabled. When System register access is enabled:
- For AArch32 implementations, ICC_PMR provides equivalent functionality.
- For AArch64 implementations, ICC_PMR_EL1 provides equivalent functionality.
GICV_PMR can be accessed through the memory-mapped interfaces:
|GIC Virtual CPU interface||0x0004||GICV_PMR|
This interface is accessible as follows:
- When GICD_CTLR.DS == 0b0 accesses to this register are RW.
- When IsAccessSecure() accesses to this register are RW.
- When !IsAccessSecure() accesses to this register are RW.