You copied the Doc URL to your clipboard.
ATS12NSOUR, Address Translate Stages 1 and 2 Non-secure Only Unprivileged Read
The ATS12NSOUR characteristics are:
Purpose
Performs stage 1 and 2 address translations as defined for PL0 and the Non-secure state, with permissions as if reading from the given virtual address.
Configuration
Attributes
ATS12NSOUR is a 32-bit System instruction.
Field descriptions
The ATS12NSOUR input value bit assignments are:
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Input address for translation | |||||||||||||||||||||||||||||||
Bits [31:0]
Input address for translation. The resulting address can be read from the PAR.
This System instruction takes a VA as input. The resulting address is the PA that is the output address of the stage 2 translation.
Executing the ATS12NSOUR instruction
Accesses to this instruction use the following encodings:
MCR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}
| coproc | opc1 | CRn | CRm | opc2 |
|---|---|---|---|---|
| 0b1111 | 0b000 | 0b0111 | 0b1000 | 0b110 |
if PSTATE.EL == EL0 then
UNDEFINED;
elsif PSTATE.EL == EL1 then
if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T7 == '1' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T7 == '1' then
AArch32.TakeHypTrapException(0x03);
elsif !ELUsingAArch32(EL2) && SCR_EL3.<NS,EEL2> == '01' then
AArch64.AArch32SystemAccessTrap(EL2, 0x03);
elsif !ELUsingAArch32(EL3) && SCR_EL3.NS == '0' then
AArch64.AArch32SystemAccessTrap(EL3, 0x03);
else
UNDEFINED;
elsif PSTATE.EL == EL2 then
ATS12NSOUR(R[t]);
elsif PSTATE.EL == EL3 then
ATS12NSOUR(R[t]);