DC CGVAP, Data, Allocation Tag or unified Cache line Clean of Allocation Tags by VA to PoP
The DC CGVAP characteristics are:
Purpose
Clean Allocation Tags in data cache by address to Point of Persistence.
If the memory system does not identify a Point of Persistence, then this instruction behaves as a DC CGVAC.
Configuration
This instruction is present only when ARMv8.5-MemTag is implemented. Otherwise, direct accesses to DC CGVAP are UNDEFINED.
Attributes
DC CGVAP is a 64-bit System instruction.
Field descriptions
The DC CGVAP input value bit assignments are:
63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
Virtual address to use | |||||||||||||||||||||||||||||||
Virtual address to use | |||||||||||||||||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Bits [63:0]
Virtual address to use. No alignment restrictions apply to this VA.
Executing the DC CGVAP instruction
If EL0 access is enabled, when executed at EL0, this instruction requires read access permission to the VA, otherwise it generates a Permission Fault, see 'Permission fault'.
Execution of this instruction might require an address translation from VA to PA, and that translation might fault. For more information, see 'The data cache maintenance instruction (DC)'.
Accesses to this instruction use the following encodings:
DC CGVAP, <Xt>
op0 | op1 | CRn | CRm | op2 |
---|---|---|---|---|
0b01 | 0b011 | 0b0111 | 0b1100 | 0b011 |
if PSTATE.EL == EL0 then if !ELUsingAArch32(EL1) && !(EL2Enabled() && HCR_EL2.<E2H,TGE> == '11') && SCTLR_EL1.UCI == '0' then if EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.<E2H,TGE> != '11' && HCR_EL2.TPCP == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && !ELUsingAArch32(EL1) && HCR_EL2.<E2H,TGE> != '11' && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HFGITR_EL2.DCCVAP == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.<E2H,TGE> == '11' && SCTLR_EL2.UCI == '0' then AArch64.SystemAccessTrap(EL2, 0x18); else DC_CGVAP(X[t]); elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TPCP == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && !ELUsingAArch32(EL2) && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HFGITR_EL2.DCCVAP == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else DC_CGVAP(X[t]); elsif PSTATE.EL == EL2 then DC_CGVAP(X[t]); elsif PSTATE.EL == EL3 then DC_CGVAP(X[t]);