You copied the Doc URL to your clipboard.

GICR_ICPENDR0, Interrupt Clear-Pending Register 0

The GICR_ICPENDR0 characteristics are:

Purpose

Removes the pending state from the corresponding SGI or PPI.

Configuration

A copy of this register is provided for each Redistributor.

Attributes

GICR_ICPENDR0 is a 32-bit register.

Field descriptions

The GICR_ICPENDR0 bit assignments are:

313029282726252423222120191817161514131211109876543210
Clear_pending_bit<x>, bit [x], for x = 0 to 31

Clear_pending_bit<x>, bit [x], for x = 0 to 31

Removes the pending state from interrupt number x. Reads and writes have the following behavior:

Clear_pending_bit<x>Meaning
0b0

If read, indicates that the corresponding interrupt is not pending.

If written, has no effect.

0b1

If read, indicates that the corresponding interrupt is pending, or active and pending.

If written, changes the state of the corresponding interrupt from pending to inactive, or from active and pending to active. This has no effect in the following cases:

  • If the interrupt is not pending and is not active and pending.
  • If the interrupt is a level-sensitive interrupt that is pending or active and pending for a reason other than a write to GICD_ISPENDR<n>. In this case, if the interrupt signal continues to be asserted, the interrupt remains pending or active and pending.

This field resets to an architecturally UNKNOWN value.

Accessing the GICR_ICPENDR0

When affinity routing is not enabled for the Security state of an interrupt in GICR_ICPENDR0, the corresponding bit is RAZ/WI and equivalent functionality is provided by GICD_ICPENDR<n> with n=0.

This register only applies to SGIs (bits [15:0]) and PPIs (bits [31:16]). For SPIs, this functionality is provided by GICD_ICENABLER<n>.

When GICD_CTLR.DS == 0, bits corresponding to Secure SGIs and PPIs are RAZ/WI to Non-secure accesses.

GICR_ICPENDR0 can be accessed through the memory-mapped interfaces:

ComponentFrameOffsetInstance
GIC RedistributorSGI_base0x0280GICR_ICPENDR0

This interface is accessible as follows:

  • When GICD_CTLR.DS == 0b0 accesses to this register are RW.
  • When IsAccessSecure() accesses to this register are RW.
  • When !IsAccessSecure() accesses to this register are RW.


Previous Next