DTLBIALL, Data TLB Invalidate All
The DTLBIALL characteristics are:
Purpose
Invalidate all cached copies of translation table entries from data TLBs that are from any level of the translation table walk. The entries that are invalidated are as follows:
- If executed at EL1, all entries that:
- Would be required for the EL1&0 translation regime.
- Match the current VMID, if EL2 is implemented and enabled in the current Security state.
- If executed in Secure state when EL3 is using AArch32, all entries that would be required for the Secure PL1&0 translation regime.
- If executed at EL2, and if EL2 is enabled in the current Security state, the stage 1 or stage 2 translation table entries that would be required for the Non-secure PL1&0 translation regime and matches the current VMID.
The invalidation only applies to the PE that executes this System instruction.
Arm deprecates the use of this System instruction. It is only provided for backwards compatibility with earlier versions of the Arm architecture.
Configuration
This instruction is present only when AArch32 is supported at any Exception level. Otherwise, direct accesses to DTLBIALL are UNDEFINED.
Attributes
DTLBIALL is a 32-bit System instruction.
Field descriptions
This instruction has no applicable fields.
The value in the register specified by <Rt> is ignored.
Executing the DTLBIALL instruction
Accesses to this instruction use the following encodings:
MCR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}
coproc | opc1 | CRn | CRm | opc2 |
---|---|---|---|---|
0b1111 | 0b000 | 0b1000 | 0b0110 | 0b000 |
if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T8 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T8 == '1' then AArch32.TakeHypTrapException(0x03); elsif EL2Enabled() && !ELUsingAArch32(EL2) && HCR_EL2.TTLB == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HCR.TTLB == '1' then AArch32.TakeHypTrapException(0x03); else DTLBIALL(); elsif PSTATE.EL == EL2 then DTLBIALL(); elsif PSTATE.EL == EL3 then DTLBIALL();