HTPIDR, Hyp Software Thread ID Register
The HTPIDR characteristics are:
Purpose
Provides a location where software running in Hyp mode can store thread identifying information that is not visible to Non-secure software executing at EL0 or EL1, for hypervisor management purposes.
The PE makes no use of this register.
Configuration
AArch32 System register HTPIDR bits [31:0] are architecturally mapped to AArch64 System register TPIDR_EL2[31:0] .
This register is present only when AArch32 is supported at any Exception level. Otherwise, direct accesses to HTPIDR are UNDEFINED.
If EL2 is not implemented, this register is RES0 from EL3.
The PE never updates this register.
Attributes
HTPIDR is a 32-bit register.
Field descriptions
The HTPIDR bit assignments are:
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Thread ID |
Bits [31:0]
Thread ID. Thread identifying information stored by software running at this Exception level.
This field resets to an architecturally UNKNOWN value.
Accessing the HTPIDR
Accesses to this register use the following encodings:
MRC{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}
coproc | opc1 | CRn | CRm | opc2 |
---|---|---|---|---|
0b1111 | 0b100 | 0b1101 | 0b0000 | 0b010 |
if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T13 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T13 == '1' then AArch32.TakeHypTrapException(0x03); else UNDEFINED; elsif PSTATE.EL == EL2 then return HTPIDR; elsif PSTATE.EL == EL3 then if SCR.NS == '0' then UNDEFINED; else return HTPIDR;
MCR{<c>}{<q>} <coproc>, {#}<opc1>, <Rt>, <CRn>, <CRm>{, {#}<opc2>}
coproc | opc1 | CRn | CRm | opc2 |
---|---|---|---|---|
0b1111 | 0b100 | 0b1101 | 0b0000 | 0b010 |
if PSTATE.EL == EL0 then UNDEFINED; elsif PSTATE.EL == EL1 then if EL2Enabled() && !ELUsingAArch32(EL2) && HSTR_EL2.T13 == '1' then AArch64.AArch32SystemAccessTrap(EL2, 0x03); elsif EL2Enabled() && ELUsingAArch32(EL2) && HSTR.T13 == '1' then AArch32.TakeHypTrapException(0x03); else UNDEFINED; elsif PSTATE.EL == EL2 then HTPIDR = R[t]; elsif PSTATE.EL == EL3 then if SCR.NS == '0' then UNDEFINED; else HTPIDR = R[t];