DC CVAU, Data or unified Cache line Clean by VA to PoU
The DC CVAU characteristics are:
Purpose
Clean data cache by address to Point of Unification.
Configuration
AArch64 System instruction DC CVAU performs the same function as AArch32 System instruction DCCMVAU.
Attributes
DC CVAU is a 64-bit System instruction.
Field descriptions
The DC CVAU input value bit assignments are:
63 | 62 | 61 | 60 | 59 | 58 | 57 | 56 | 55 | 54 | 53 | 52 | 51 | 50 | 49 | 48 | 47 | 46 | 45 | 44 | 43 | 42 | 41 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 33 | 32 |
Virtual address to use | |||||||||||||||||||||||||||||||
Virtual address to use | |||||||||||||||||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Bits [63:0]
Virtual address to use. No alignment restrictions apply to this VA.
Executing the DC CVAU instruction
If EL0 access is enabled, when executed at EL0, this instruction requires read access permission to the VA, otherwise it generates a Permission Fault, subject to the constraints described in 'Permission fault'.
Execution of this instruction might require an address translation from VA to PA, and that translation might fault. For more information, see 'The data cache maintenance instruction (DC)'.
Accesses to this instruction use the following encodings:
DC CVAU, <Xt>
op0 | op1 | CRn | CRm | op2 |
---|---|---|---|---|
0b01 | 0b011 | 0b0111 | 0b1011 | 0b001 |
if PSTATE.EL == EL0 then if !(EL2Enabled() && HCR_EL2.<E2H,TGE> == '11') && SCTLR_EL1.UCI == '0' then if EL2Enabled() && HCR_EL2.TGE == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else AArch64.SystemAccessTrap(EL1, 0x18); elsif EL2Enabled() && HCR_EL2.<E2H,TGE> != '11' && HCR_EL2.TPU == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2.<E2H,TGE> != '11' && HCR_EL2.TOCU == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2.<E2H,TGE> != '11' && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HFGITR_EL2.DCCVAU == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2.<E2H,TGE> == '11' && SCTLR_EL2.UCI == '0' then AArch64.SystemAccessTrap(EL2, 0x18); else DC_CVAU(X[t]); elsif PSTATE.EL == EL1 then if EL2Enabled() && HCR_EL2.TPU == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && HCR_EL2.TOCU == '1' then AArch64.SystemAccessTrap(EL2, 0x18); elsif EL2Enabled() && (!HaveEL(EL3) || SCR_EL3.FGTEn == '1') && HFGITR_EL2.DCCVAU == '1' then AArch64.SystemAccessTrap(EL2, 0x18); else DC_CVAU(X[t]); elsif PSTATE.EL == EL2 then DC_CVAU(X[t]); elsif PSTATE.EL == EL3 then DC_CVAU(X[t]);