TRCSEQRSTEVR, Sequencer Reset Control Register
The TRCSEQRSTEVR characteristics are:
Purpose
Moves the Sequencer to state 0 when a programmed resource event occurs.
Configuration
External register TRCSEQRSTEVR bits [31:0] are architecturally mapped to AArch64 System register TRCSEQRSTEVR[31:0] .
This register is present only when FEAT_ETE is implemented and TRCIDR5.NUMSEQSTATE != 0b000. Otherwise, direct accesses to TRCSEQRSTEVR are RES0.
Attributes
TRCSEQRSTEVR is a 32-bit register.
Field descriptions
The TRCSEQRSTEVR bit assignments are:
Bits [31:8]
Reserved, RES0.
RST_TYPE, bit [7]
Chooses the type of Resource Selector.
| RST_TYPE | Meaning |
|---|---|
| 0b0 | A single Resource Selector. TRCSEQRSTEVR.RST.SEL[4:0] selects the single Resource Selector, from 0-31, used to activate the resource event. |
| 0b1 | A Boolean-combined pair of Resource Selectors. TRCSEQRSTEVR.RST.SEL[3:0] selects the Resource Selector pair, from 0-15, that has a Boolean function that is applied to it whose output is used to activate the resource event. TRCSEQRSTEVR.RST.SEL[4] is RES0. |
On a Trace unit reset, this field resets to an architecturally UNKNOWN value.
Bits [6:5]
Reserved, RES0.
RST_SEL, bits [4:0]
Defines the selected Resource Selector or pair of Resource Selectors. TRCSEQRSTEVR.RST.TYPE controls whether TRCSEQRSTEVR.RST.SEL is the index of a single Resource Selector, or the index of a pair of Resource Selectors.
If an unimplemented Resource Selector is selected using this field, the behavior of the resource event is UNPREDICTABLE, and the resource event might fire or might not fire when the resources are not in the Paused state.
Selecting Resource Selector pair 0 using this field is UNPREDICTABLE, and the resource event might fire or might not fire when the resources are not in the Paused state.
On a Trace unit reset, this field resets to an architecturally UNKNOWN value.
Accessing the TRCSEQRSTEVR
Must be programmed if TRCRSCTLR<a>.GROUP == 0b0010 and TRCRSCTLR<a>.SEQUENCER != 0b0000.
Writes are CONSTRAINED UNPREDICTABLE if the trace unit is not in the Idle state.
TRCSEQRSTEVR can be accessed through the external debug interface:
| Component | Offset |
|---|---|
| ETE | 0x118 |
This interface is accessible as follows:
- When OSLockStatus(), or !AllowExternalTraceAccess() or !IsTraceCorePowered() accesses to this register generate an error response.
- Otherwise accesses to this register are RW.