You copied the Doc URL to your clipboard.

TRCIDR5, ID Register 5

The TRCIDR5 characteristics are:

Purpose

Returns the tracing capabilities of the trace unit.

Configuration

External register TRCIDR5 bits [31:0] are architecturally mapped to AArch64 System register TRCIDR5[31:0] .

This register is present only when ETE is implemented. Otherwise, direct accesses to TRCIDR5 are RES0.

Attributes

TRCIDR5 is a 32-bit register.

Field descriptions

The TRCIDR5 bit assignments are:

313029282726252423222120191817161514131211109876543210
RES0NUMCNTRNUMSEQSTATERES0LPOVERRIDEATBTRIGTRACEIDSIZERES0NUMEXTINSELNUMEXTIN

Bit [31]

Reserved, RES0.

NUMCNTR, bits [30:28]

Indicates the number of counters that are available for tracing.

NUMCNTRMeaning
0b000

No counters are available.

0b001

One counter implemented.

0b010

Two counters implemented.

0b011

Three counters implemented.

0b100

Four counters implemented.

All other values are reserved.

This field is RES0 if TRCIDR4.NUMRSPAIR == 0b0000.

NUMSEQSTATE, bits [27:25]

Indicates if the sequencer is implemented and the number of sequencer states that are implemented.

NUMSEQSTATEMeaning
0b000

The sequencer is not implemented.

0b100

Four sequencer states are implemented.

All other values are reserved.

This field is RES0 if TRCIDR4.NUMRSPAIR == 0b0000.

Bit [24]

Reserved, RES0.

LPOVERRIDE, bit [23]

Indicates support for Low-power Override Mode.

LPOVERRIDEMeaning
0b0

The trace unit does not support Low-power Override Mode.

0b1

The trace unit support Low-power Override Mode.

ATBTRIG, bit [22]

Indicates if the implementation can support ATB triggers.

ATBTRIGMeaning
0b0

The implementation does not support ATB triggers.

0b1

The implementation supports ATB triggers.

This bit is RES0 if TRCIDR4.NUMRSPAIR == 0b0000.

TRACEIDSIZE, bits [21:16]

Indicates the trace ID width.

TRACEIDSIZEMeaning
0b000000

The external trace interface is not implemented.

0b000111

The implementation supports a 7-bit trace ID.

All other values are reserved.

Note that AMBA ATB requires a 7-bit trace ID width.

Bits [15:12]

Reserved, RES0.

NUMEXTINSEL, bits [11:9]

Indicates how many external input selector resources are implemented.

NUMEXTINSELMeaning
0b000

No external input selector resources are available.

0b001

1 external input selector resource is available.

0b010

2 external input selector resources are available.

0b011

3 external input selector resources are available.

0b100

4 external input selector resources are available.

All other values are reserved.

NUMEXTIN, bits [8:0]

Indicates how many external inputs are implemented.

NUMEXTINMeaning
0b111111111

Unified PMU event selection.

All other values are reserved.

Accessing the TRCIDR5

TRCIDR5 can be accessed through the external debug interface:

ComponentOffset
ETE0x1F4

This interface is accessible as follows:

  • When OSLockStatus() or !IsTraceCorePowered() accesses to this register generate an error response.
  • Otherwise accesses to this register are RO.


Was this page helpful? Yes No