You copied the Doc URL to your clipboard.

TRCSEQRSTEVR, Sequencer Reset Control Register

The TRCSEQRSTEVR characteristics are:

Purpose

Moves the sequencer to state 0 when a programmed resource event occurs.

Configuration

External register TRCSEQRSTEVR bits [31:0] are architecturally mapped to AArch64 System register TRCSEQRSTEVR[31:0] .

RW fields in this register reset to architecturally UNKNOWN values.

This register is present only when ETE is implemented and TRCIDR5.NUMSEQSTATE != 0b000. Otherwise, direct accesses to TRCSEQRSTEVR are RES0.

Attributes

TRCSEQRSTEVR is a 32-bit register.

Field descriptions

The TRCSEQRSTEVR bit assignments are:

313029282726252423222120191817161514131211109876543210
RES0RST_TYPERES0RST_SEL

Bits [31:8]

Reserved, RES0.

RST_TYPE, bit [7]

Chooses the type of Resource Selector.

RST_TYPEMeaning
0b0

A single Resource Selector.

TRCSEQRSTEVR.RST.SEL[4:0] selects the single Resource Selector, from 0-31, used to activate the resource event.

0b1

A Boolean-combined pair of Resource Selectors.

TRCSEQRSTEVR.RST.SEL[3:0] selects the Resource Selector pair, from 0-15, that has a Boolean function that is applied to it whose output is used to activate the resource event. TRCSEQRSTEVR.RST.SEL[4] is RES0.

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Bits [6:5]

Reserved, RES0.

RST_SEL, bits [4:0]

Defines the selected Resource Selector or pair of Resource Selectors. TRCSEQRSTEVR.RST.TYPE controls whether TRCSEQRSTEVR.RST.SEL is the index of a single Resource Selector, or the index of a pair of Resource Selectors.

If an unimplemented Resource Selector is selected using this field, the behavior of the resource event is UNPREDICTABLE, and the resource event might fire or might not fire.

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing the TRCSEQRSTEVR

Must be programmed if TRCRSCTLR<a>.GROUP == 0b0010 and TRCRSCTLR<a>.SEQUENCER != 0b0000.

Writes are CONSTRAINED UNPREDICTABLE if the trace unit is not in the Idle state.

TRCSEQRSTEVR can be accessed through the external debug interface:

ComponentOffset
ETE0x118

This interface is accessible as follows:

  • When !AllowExternalTraceAccess(), or OSLockStatus() or !IsTraceCorePowered() accesses to this register generate an error response.
  • Otherwise accesses to this register are RW.


Was this page helpful? Yes No