You copied the Doc URL to your clipboard.

TRCVMIDCVR<n>, Virtual Context Identifier Comparator Value Register <n>, n = 0 - 7

The TRCVMIDCVR<n> characteristics are:

Purpose

Contains the Virtual Context Identifier Comparator value.

Configuration

External register TRCVMIDCVR<n> bits [63:0] are architecturally mapped to AArch64 System register TRCVMIDCVR<n>[63:0] .

RW fields in this register reset to architecturally UNKNOWN values.

This register is present only when ETE is implemented and TRCIDR4.NUMVMIDC > n. Otherwise, direct accesses to TRCVMIDCVR<n> are RES0.

Attributes

TRCVMIDCVR<n> is a 64-bit register.

Field descriptions

The TRCVMIDCVR<n> bit assignments are:

6362616059585756555453525150494847464544434241403938373635343332
VALUE
VALUE
313029282726252423222120191817161514131211109876543210

VALUE, bits [63:0]

Virtual context identifier value. The width of this field is indicated by TRCIDR2.VMIDSIZE. Unimplemented bits are RES0. After a PE Reset, the trace unit assumes that the Virtual context identifier is zero until the PE updates the Virtual context identifier .

On a Trace unit reset, this field resets to an architecturally UNKNOWN value.

Accessing the TRCVMIDCVR<n>

Must be programmed if any of the following are true:

  • TRCRSCTLR<a>.GROUP == 0b0111 and TRCRSCTLR<a>.VMID[n] == 0b1.

  • TRCACATR<a>.CONTEXTTYPE == 0b10 or 0b11 and TRCACATR<a>.CONTEXT == n.

TRCVMIDCVR<n> can be accessed through the external debug interface:

ComponentOffset
ETE0x640 + 8n

This interface is accessible as follows:

  • When !AllowExternalTraceAccess(), or OSLockStatus() or !IsTraceCorePowered() accesses to this register generate an error response.
  • Otherwise accesses to this register are RW.


Was this page helpful? Yes No