You copied the Doc URL to your clipboard.

FMAXP

Floating-point maximum pairwise.

Compute the maximum value of each pair of adjacent floating-point elements within each source vector, and interleave the results from corresponding lanes. The interleaved result values are destructively placed in the first source vector.

313029282726252423222120191817161514131211109876543210
01100100size010110100PgZmZdn

SVE2

FMAXP <Zdn>.<T>, <Pg>/M, <Zdn>.<T>, <Zm>.<T>

if !HaveSVE2() then UNDEFINED;
if size == '00' then UNDEFINED;
integer esize = 8 << UInt(size);
integer g = UInt(Pg);
integer m = UInt(Zm);
integer dn = UInt(Zdn);

Assembler Symbols

<Zdn>

Is the name of the first source and destination scalable vector register, encoded in the "Zdn" field.

<T> Is the size specifier, encoded in size:
size <T>
00 RESERVED
01 H
10 S
11 D
<Pg>

Is the name of the governing scalable predicate register P0-P7, encoded in the "Pg" field.

<Zm>

Is the name of the second source scalable vector register, encoded in the "Zm" field.

Operation

CheckSVEEnabled();
integer elements = VL DIV esize;
bits(PL) mask = P[g];
bits(VL) operand1 = Z[dn];
bits(VL) operand2 = Z[m];
bits(VL) result = Z[dn];
bits(esize) element1;
bits(esize) element2;

for e = 0 to elements-1
    if ElemP[mask, e, esize] == '1' then
        if IsEven(e) then
            element1 = Elem[operand1, e + 0, esize];
            element2 = Elem[operand1, e + 1, esize];
        else
            element1 = Elem[operand2, e - 1, esize];
            element2 = Elem[operand2, e + 0, esize];
        Elem[result, e, esize] = FPMax(element1, element2, FPCR);

Z[dn] = result;

Operational information

This instruction might be immediately preceded in program order by a MOVPRFX instruction that conforms to all of the following requirements, otherwise the behavior of either or both instructions is unpredictable:

  • The MOVPRFX instruction must specify the same destination register as this instruction.
  • The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.
The MOVPRFX instructions that can be used with this instruction are as follows:
  • An unpredicated MOVPRFX instruction.
  • A predicated MOVPRFX instruction using the same governing predicate register and source element size as this instruction.