You copied the Doc URL to your clipboard.

SABALB

Signed absolute difference and accumulate long (bottom).

Compute the absolute difference between even-numbered signed integer values in elements of the second source vector and corresponding elements of the first source vector, and destructively add to the overlapping double-width elements of the addend vector. This instruction is unpredicated.

313029282726252423222120191817161514131211109876543210
01000101size0Zm110000ZnZda

SVE2

SABALB <Zda>.<T>, <Zn>.<Tb>, <Zm>.<Tb>

if !HaveSVE2() then UNDEFINED;
if size == '00' then UNDEFINED;
integer esize = 8 << UInt(size);
integer n = UInt(Zn);
integer m = UInt(Zm);
integer da = UInt(Zda);

Assembler Symbols

<Zda>

Is the name of the third source and destination scalable vector register, encoded in the "Zda" field.

<T> Is the size specifier, encoded in size:
size <T>
00 RESERVED
01 H
10 S
11 D
<Zn>

Is the name of the first source scalable vector register, encoded in the "Zn" field.

<Tb> Is the size specifier, encoded in size:
size <Tb>
00 RESERVED
01 B
10 H
11 S
<Zm>

Is the name of the second source scalable vector register, encoded in the "Zm" field.

Operation

CheckSVEEnabled();
integer elements = VL DIV esize;
bits(VL) operand1 = Z[n];
bits(VL) operand2 = Z[m];
bits(VL) result = Z[da];

for e = 0 to elements-1
    integer element1 = SInt(Elem[operand1, 2*e + 0, esize DIV 2]);
    integer element2 = SInt(Elem[operand2, 2*e + 0, esize DIV 2]);
    integer element3 = SInt(Elem[result, e, esize]);
    integer res = element3 + Abs(element1 - element2);
    Elem[result, e, esize] = res<esize-1:0>;

Z[da] = result;

Operational information

If PSTATE.DIT is 1:

  • The execution time of this instruction is independent of:
    • The values of the data supplied in any of its registers.
    • The values of the NZCV flags.
  • The response of this instruction to asynchronous exceptions does not vary based on:
    • The values of the data supplied in any of its registers.
    • The values of the NZCV flags.

This instruction might be immediately preceded in program order by a MOVPRFX instruction that conforms to all of the following requirements, otherwise the behavior of either or both instructions is unpredictable:

  • The MOVPRFX instruction must specify the same destination register as this instruction.
  • The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.
The MOVPRFX instructions that can be used with this instruction are as follows:
  • An unpredicated MOVPRFX instruction.