You copied the Doc URL to your clipboard.

MOV (SIMD&FP scalar, predicated)

Move SIMD&FP scalar register to vector elements (predicated).

Move the SIMD & floating-point scalar source register to each active element in the destination vector. Inactive elements in the destination vector register remain unmodified.

This is an alias of CPY (SIMD&FP scalar). This means:

313029282726252423222120191817161514131211109876543210
00000101size100000100PgVnZd

MOV <Zd>.<T>, <Pg>/M, <V><n>

is equivalent to

CPY <Zd>.<T>, <Pg>/M, <V><n>

and is always the preferred disassembly.

Assembler Symbols

<Zd>

Is the name of the destination scalable vector register, encoded in the "Zd" field.

<T> Is the size specifier, encoded in size:
size <T>
00 B
01 H
10 S
11 D
<Pg>

Is the name of the governing scalable predicate register P0-P7, encoded in the "Pg" field.

<V> Is a width specifier, encoded in size:
size <V>
00 B
01 H
10 S
11 D
<n>

Is the number [0-31] of the source SIMD&FP register, encoded in the "Vn" field.

Operation

The description of CPY (SIMD&FP scalar) gives the operational pseudocode for this instruction.

Operational information

If PSTATE.DIT is 1:

  • The execution time of this instruction is independent of:
    • The values of the data supplied in any of its operand registers when its governing predicate register contains the same value for each execution.
    • The values of the NZCV flags.
  • The response of this instruction to asynchronous exceptions does not vary based on:
    • The values of the data supplied in any of its operand registers when its governing predicate register contains the same value for each execution.
    • The values of the NZCV flags.

This instruction might be immediately preceded in program order by a MOVPRFX instruction. The MOVPRFX instruction must conform to all of the following requirements, otherwise the behavior of the MOVPRFX and this instruction is unpredictable:

  • The MOVPRFX instruction must be unpredicated, or be predicated using the same governing predicate register and source element size as this instruction.
  • The MOVPRFX instruction must specify the same destination register as this instruction.
  • The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.