You copied the Doc URL to your clipboard.

SSRA

Signed shift right and accumulate (immediate).

Shift right by immediate each signed element of the source vector, preserving the sign bit, and add the truncated intermediate result destructively to the corresponding elements of the addend vector. The immediate shift amount is an unsigned value in the range 1 to number of bits per element. This instruction is unpredicated.

313029282726252423222120191817161514131211109876543210
01000101tszh0tszlimm3111000ZnZda
RU
if !HaveSVE2() then UNDEFINED;
bits(4) tsize = tszh:tszl;
case tsize of
    when '0000' UNDEFINED;
    when '0001' esize = 8;
    when '001x' esize = 16;
    when '01xx' esize = 32;
    when '1xxx' esize = 64;
integer n = UInt(Zn);
integer da = UInt(Zda);
integer shift = (2 * esize) - UInt(tsize:imm3);

Assembler Symbols

<Zda>

Is the name of the third source and destination scalable vector register, encoded in the "Zda" field.

<T> Is the size specifier, encoded in tszh:tszl:
tszh tszl <T>
00 00 RESERVED
00 01 B
00 1x H
01 xx S
1x xx D
<Zn>

Is the name of the first source scalable vector register, encoded in the "Zn" field.

<const>

Is the immediate shift amount, in the range 1 to number of bits per element, encoded in "tsz:imm3".

Operation

CheckSVEEnabled();
integer elements = VL DIV esize;
bits(VL) operand1 = Z[n];
bits(VL) operand2 = Z[da];
bits(VL) result;

for e = 0 to elements-1
    integer element = SInt(Elem[operand1, e, esize]) >> shift;
    Elem[result, e, esize] = Elem[operand2, e, esize] + element<esize-1:0>;

Z[da] = result;

Operational information

If PSTATE.DIT is 1:

  • The execution time of this instruction is independent of:
    • The values of the data supplied in any of its registers.
    • The values of the NZCV flags.
  • The response of this instruction to asynchronous exceptions does not vary based on:
    • The values of the data supplied in any of its registers.
    • The values of the NZCV flags.

This instruction might be immediately preceded in program order by a MOVPRFX instruction. The MOVPRFX instruction must conform to all of the following requirements, otherwise the behavior of the MOVPRFX and this instruction is unpredictable:

  • The MOVPRFX instruction must be unpredicated.
  • The MOVPRFX instruction must specify the same destination register as this instruction.
  • The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.