You copied the Doc URL to your clipboard.

SCVTF (scalar, integer)

Signed integer Convert to Floating-point (scalar). This instruction converts the signed integer value in the general-purpose source register to a floating-point value using the rounding mode that is specified by the FPCR, and writes the result to the SIMD&FP destination register.

A floating-point exception can be generated by this instruction. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR, or a synchronous exception being generated. For more information, see Floating-point exception traps.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.

313029282726252423222120191817161514131211109876543210
sf0011110ftype100010000000RnRd
rmodeopcode

32-bit to half-precision (sf == 0 && ftype == 11)
(Armv8.2)

SCVTF <Hd>, <Wn>

32-bit to single-precision (sf == 0 && ftype == 00)

SCVTF <Sd>, <Wn>

32-bit to double-precision (sf == 0 && ftype == 01)

SCVTF <Dd>, <Wn>

64-bit to half-precision (sf == 1 && ftype == 11)
(Armv8.2)

SCVTF <Hd>, <Xn>

64-bit to single-precision (sf == 1 && ftype == 00)

SCVTF <Sd>, <Xn>

64-bit to double-precision (sf == 1 && ftype == 01)

SCVTF <Dd>, <Xn>

integer d = UInt(Rd);
integer n = UInt(Rn);

integer intsize = if sf == '1' then 64 else 32;
integer fltsize;
FPRounding rounding;

case ftype of
    when '00'
        fltsize = 32;
    when '01'
        fltsize = 64;
    when '10'
        UNDEFINED;
    when '11'
        if HaveFP16Ext() then
            fltsize = 16;
        else
            UNDEFINED;

rounding = FPRoundingMode(FPCR[]);

Assembler Symbols

<Dd>

Is the 64-bit name of the SIMD&FP destination register, encoded in the "Rd" field.

<Hd>

Is the 16-bit name of the SIMD&FP destination register, encoded in the "Rd" field.

<Sd>

Is the 32-bit name of the SIMD&FP destination register, encoded in the "Rd" field.

<Xn>

Is the 64-bit name of the general-purpose source register, encoded in the "Rn" field.

<Wn>

Is the 32-bit name of the general-purpose source register, encoded in the "Rn" field.

Operation

CheckFPAdvSIMDEnabled64();

bits(fltsize) fltval;
bits(intsize) intval;

intval = X[n];
fltval = FixedToFP(intval, 0, FALSE, FPCR[], rounding);
V[d] = fltval;