You copied the Doc URL to your clipboard.

ADC

Add with Carry adds two register values and the Carry flag value, and writes the result to the destination register.

313029282726252423222120191817161514131211109876543210
sf0011010000Rm000000RnRd
opS

32-bit (sf == 0)

ADC <Wd>, <Wn>, <Wm>

64-bit (sf == 1)

ADC <Xd>, <Xn>, <Xm>

integer d = UInt(Rd);
integer n = UInt(Rn);
integer m = UInt(Rm);
integer datasize = if sf == '1' then 64 else 32;

Assembler Symbols

<Wd>

Is the 32-bit name of the general-purpose destination register, encoded in the "Rd" field.

<Wn>

Is the 32-bit name of the first general-purpose source register, encoded in the "Rn" field.

<Wm>

Is the 32-bit name of the second general-purpose source register, encoded in the "Rm" field.

<Xd>

Is the 64-bit name of the general-purpose destination register, encoded in the "Rd" field.

<Xn>

Is the 64-bit name of the first general-purpose source register, encoded in the "Rn" field.

<Xm>

Is the 64-bit name of the second general-purpose source register, encoded in the "Rm" field.

Operation

bits(datasize) result;
bits(datasize) operand1 = X[n];
bits(datasize) operand2 = X[m];

(result, -) = AddWithCarry(operand1, operand2, PSTATE.C);

X[d] = result;

Operational information

If PSTATE.DIT is 1:

  • The execution time of this instruction is independent of:
    • The values of the data supplied in any of its registers.
    • The values of the NZCV flags.
  • The response of this instruction to asynchronous exceptions does not vary based on:
    • The values of the data supplied in any of its registers.
    • The values of the NZCV flags.
Was this page helpful? Yes No