You copied the Doc URL to your clipboard.

DCPS2

Debug Change PE State to EL2, when executed in Debug state:

  • If executed at EL0 or EL1 changes the current Exception level and SP to EL2 using SP_EL2.
  • Otherwise, if executed at ELx, selects SP_ELx.

The target exception level of a DCPS2 instruction is:

  • EL2 if the instruction is executed at an exception level that is not EL3.
  • EL3 if the instruction is executed at EL3.

When the target Exception level of a DCPS2 instruction is ELx, on executing this instruction:

This instruction is undefined at the following exception levels:

  • All exception levels if EL2 is not implemented.
  • At EL0 and EL1 if EL2 is disabled in the current Security state.

This instruction is always undefined in Non-debug state.

For more information on the operation of the DCPSn instructions, see DCPS.

313029282726252423222120191817161514131211109876543210
11010100101imm1600010
LL

System

DCPS2 {#<imm>}

if !Halted() then UNDEFINED;

Assembler Symbols

<imm>

Is an optional 16-bit unsigned immediate, in the range 0 to 65535, defaulting to 0 and encoded in the "imm16" field.

Operation

DCPSInstruction(LL);
Was this page helpful? Yes No