You copied the Doc URL to your clipboard.

PRFM (literal)

Prefetch Memory (literal) signals the memory system that data memory accesses from a specified address are likely to occur in the near future. The memory system can respond by taking actions that are expected to speed up the memory accesses when they do occur, such as preloading the cache line containing the specified address into one or more caches.

The effect of an PRFM instruction is implementation defined. For more information, see Prefetch memory.

For information about memory accesses, see Load/Store addressing modes.

313029282726252423222120191817161514131211109876543210
11011000imm19Rt
opc

Literal

PRFM (<prfop>|#<imm5>), <label>

integer t = UInt(Rt);
bits(64) offset;

offset = SignExtend(imm19:'00', 64);

Assembler Symbols

<prfop>

Is the prefetch operation, defined as <type><target><policy>.

<type> is one of:

PLD
Prefetch for load, encoded in the "Rt<4:3>" field as 0b00.
PLI
Preload instructions, encoded in the "Rt<4:3>" field as 0b01.
PST
Prefetch for store, encoded in the "Rt<4:3>" field as 0b10.

<target> is one of:

L1
Level 1 cache, encoded in the "Rt<2:1>" field as 0b00.
L2
Level 2 cache, encoded in the "Rt<2:1>" field as 0b01.
L3
Level 3 cache, encoded in the "Rt<2:1>" field as 0b10.

<policy> is one of:

KEEP
Retained or temporal prefetch, allocated in the cache normally. Encoded in the "Rt<0>" field as 0.
STRM
Streaming or non-temporal prefetch, for data that is used only once. Encoded in the "Rt<0>" field as 1.

For more information on these prefetch operations, see Prefetch memory.

For other encodings of the "Rt" field, use <imm5>.

<imm5>

Is the prefetch operation encoding as an immediate, in the range 0 to 31, encoded in the "Rt" field.

This syntax is only for encodings that are not accessible using <prfop>.

<label>

Is the program label from which the data is to be loaded. Its offset from the address of this instruction, in the range +/-1MB, is encoded as "imm19" times 4.

Operation

bits(64) address = PC[] + offset;

if HaveMTEExt() then
    SetNotTagCheckedInstruction(TRUE);

Prefetch(address, t<4:0>);
Was this page helpful? Yes No