You copied the Doc URL to your clipboard.

SWPB, SWPAB, SWPALB, SWPLB

Swap byte in memory atomically loads an 8-bit byte from a memory location, and stores the value held in a register back to the same memory location. The value initially loaded from memory is returned in the destination register.

  • If the destination register is not WZR, SWPAB and SWPALB load from memory with acquire semantics.
  • SWPLB and SWPALB store to memory with release semantics.
  • SWPB has no memory ordering requirements.

For more information about memory ordering semantics see Load-Acquire, Store-Release.

For information about memory accesses see Load/Store addressing modes.

Integer
(Armv8.1)

313029282726252423222120191817161514131211109876543210
00111000AR1Rs100000RnRt
size

SWPAB (A == 1 && R == 0)

SWPAB <Ws>, <Wt>, [<Xn|SP>]

SWPALB (A == 1 && R == 1)

SWPALB <Ws>, <Wt>, [<Xn|SP>]

SWPB (A == 0 && R == 0)

SWPB <Ws>, <Wt>, [<Xn|SP>]

SWPLB (A == 0 && R == 1)

SWPLB <Ws>, <Wt>, [<Xn|SP>]

if !HaveAtomicExt() then UNDEFINED;

integer t = UInt(Rt);
integer n = UInt(Rn);
integer s = UInt(Rs);

AccType ldacctype = if A == '1' && Rt != '11111' then AccType_ORDEREDATOMICRW else AccType_ATOMICRW;
AccType stacctype = if R == '1' then AccType_ORDEREDATOMICRW else AccType_ATOMICRW;
boolean tag_checked = n != 31;

Assembler Symbols

<Ws>

Is the 32-bit name of the general-purpose register to be stored, encoded in the "Rs" field.

<Wt>

Is the 32-bit name of the general-purpose register to be loaded, encoded in the "Rt" field.

<Xn|SP>

Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field.

Operation

bits(64) address;
bits(8) data;
bits(8) store_value;

if HaveMTEExt() then
    SetNotTagCheckedInstruction(!tag_checked);

if n == 31 then
    CheckSPAlignment();
    address = SP[];
else
    address = X[n];

store_value = X[s];
data = MemAtomic(address, MemAtomicOp_SWP, store_value, ldacctype, stacctype);
X[t] = ZeroExtend(data, 32);
Was this page helpful? Yes No