You copied the Doc URL to your clipboard.

2.1. Setting up the RealView Platform

The following items are supplied with the PB926EJ-S:

  • the PB926EJ-S printed-circuit board mounted on a metal tray

  • an AC power supply that provides a 12VDC output

  • a CD containing sample programs, Boot Monitor code, FPGA and PLD images, and additional documentation

  • this user guide.

To set up the PB926EJ-S as a standalone development system:

  1. Set the configuration switches to select the boot memory location, operating frequency, and FPGA image. See Setting the configuration switches.

  2. If you are using memory expansion boards, connect them to the PB926EJ-S. See Appendix E Memory Expansion Boards.

  3. If you are using an external display:

    • For VGA displays, connect the cable from the display to the VGA connector on the PB926EJ-S.

    • For CLCD displays, connect the CLCD adaptor board cable to the PB926EJ-S. See Appendix C CLCD Display and Adaptor Board.

  4. If you are using expansion Logic Tiles, mount the tile on the tile expansion connectors. See Appendix F RealView Logic Tile and the manual for your Logic Tile.

  5. If you are using a Trace Port Analyzer (TPA), connect the Trace Port interface buffer board. See Connecting the Trace Port Analyzer.

  6. If you are using a debugger, connect to the JTAG or USB debug port on the board. See Connecting JTAG debugging equipment.

  7. Apply power to the PB926EJ-S. See Supplying power.

  8. If you are using the supplied Boot Monitor software to select and run an application, see Using the PB926EJ-S Boot Monitor and platform library


If you are using the PB926EJ-S with the PCI backplane, see also Appendix D PCI Backplane and Enclosure.

Was this page helpful? Yes No